Wikiposts
Search
Private Flying LAA/BMAA/BGA/BPA The sheer pleasure of flight.

DME/TDME

Thread Tools
 
Search this Thread
 
Old 2nd Mar 2010, 18:02
  #1 (permalink)  
Thread Starter
 
Join Date: Oct 2005
Location: EGLG
Age: 36
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
DME/TDME

I am currently a student flying cross country. Although I don't entirely rely on them, I find DMEs so useful when tuned to a VOR freq, to locate myself on the map and know how far along the track I am etc.

My question is would the TDME aid me in anyway? Would it measure how far im from the airport if I am 10 miles inbound for example?

Thanks
Airbusboy is offline  
Old 2nd Mar 2010, 18:53
  #2 (permalink)  
 
Join Date: Jun 2003
Location: EuroGA.org
Posts: 13,787
Likes: 0
Received 0 Likes on 0 Posts
Sure, you can use them. Just remember their range is generally much less; of the order of 10-20nm. Having said that, yesterday I was picking up Shoreham from ~50nm and that is common.

To be picky, the airport DME will be set up to read zero when you are at a certain place (not necessarily at the centre of the runway) and this can cause small errors (a fraction of a mile) if you are in an altogether different direction. I don't know of any cases where you would get huge errors.

Most of the time, a DME is within a fraction of a mile of the GPS distance, and that's plenty good enough for backup purposes.
IO540 is offline  
Old 2nd Mar 2010, 23:27
  #3 (permalink)  
Thread Starter
 
Join Date: Oct 2005
Location: EGLG
Age: 36
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the reply! Gonna try it out in my next nav ex
Airbusboy is offline  
Old 3rd Mar 2010, 17:28
  #4 (permalink)  
 
Join Date: Jan 1999
Location: north of barlu
Posts: 6,207
Likes: 0
Received 0 Likes on 0 Posts
Just to put a little more flesh on the bones of what IO540 has said, the TDME is usualy paired with an approach aid like an ILS, the reading is usualy set to zero at the touch down point of the runway.

Most of the single runway airports in the UK have ILS on both ends but only one frequency so they switch off the ILS on the end that they are not using, the TDME is located at the runway mid point and is adjusted so it will read zero at the touchdown point at both ends (if you are nearer to the DME than the TDZ then you get an error flag).

There are moves afoot to stop this practice because it feeds errors into the FMS computor of airliners, most modern airliners use DME/DME as the primary navigation sorce, for this they are fitted with 5 DME units three of them permanently connected to the FMS system, this DME/DME fixing is more accurate than GPS untill they get hold of a TDME that has its own error (of half the runway length built in).

For your VFR navigation using the TDME is a very good idea for backing up DR & map reading, at the alitudes that you are flying DME range should not be a problem unless it says Narco on front of the DME box.
A and C is offline  
Old 3rd Mar 2010, 20:04
  #5 (permalink)  
 
Join Date: Jun 2003
Location: EuroGA.org
Posts: 13,787
Likes: 0
Received 0 Likes on 0 Posts
That's really interesting, A&C. I would have thought that the FMS navaid databases would have corrections built in for this; let's face it; it is pretty well known

Is DME more accurate than GPS? It is more robust for sure (interference wise) but I thought the resolution (and thereofre the accuracy limit, unless you can manage to interpolate) is 0.1nm.

unless it says Narco on front of the DME box.
Scarily accurate

The other problem with a DME is that the aircraft box can fail without any warning yet return plausible values. I used to fly with one such in my IMCR training, in a PA28-181. It always read something plausible between 3D and 10D - perfect for instrument approaches
IO540 is offline  
Old 4th Mar 2010, 06:41
  #6 (permalink)  
 
Join Date: Jan 1999
Location: north of barlu
Posts: 6,207
Likes: 0
Received 0 Likes on 0 Posts
IO540

The DME will only show the pilot a reading down to 0.1nm but the FMC in an airliner sees the distance much more accuratly.

In my opinion IFR navigation will be all GPS with DME/DME back up in twenty years.................................now who has one of those Narco NS900 starnav's that the GA community did not understand (& buy) it was a system yeard ahead of its time.

(but I would interface it with a King DME!)
A and C is offline  
Old 4th Mar 2010, 18:47
  #7 (permalink)  
Thread Starter
 
Join Date: Oct 2005
Location: EGLG
Age: 36
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Also guys, for the TDME, is it the same procedure, tune in the frequency e.g. Southend TDME(111.35) and centre the needle indicating TO ? Or can I just enter 111.35 ?
Airbusboy is offline  
Old 4th Mar 2010, 20:19
  #8 (permalink)  
 
Join Date: Jun 2003
Location: EuroGA.org
Posts: 13,787
Likes: 0
Received 0 Likes on 0 Posts
DME is just a box where you select the frequency and it reads the distance to the DME beacon. There is no TO/FROM flag or bearing to set etc - that is a VOR.

There is the VHF/UHF channel pairing thingy with DME but you don't need to know about that if you are a pilot because the equipment does the conversion internally.
IO540 is offline  
Old 4th Mar 2010, 20:21
  #9 (permalink)  
Thread Starter
 
Join Date: Oct 2005
Location: EGLG
Age: 36
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Ah yes! I was a bit confused. Thank you IO540
Airbusboy is offline  
Old 4th Mar 2010, 20:28
  #10 (permalink)  
 
Join Date: Jan 2001
Location: In the boot of my car!
Posts: 5,982
Likes: 0
Received 0 Likes on 0 Posts
Airbusboy

The other point that hasnt been covered here is that DME is reading a slant angle so for instance if you are 3 miles high it will never read less than three miles even overhead.

GPS is giving you a distance between points regardless of slant angle.

Pace
Pace is offline  
Old 15th Mar 2010, 22:40
  #11 (permalink)  
 
Join Date: Aug 2009
Location: Copenhagen
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Most DME's has a "memory" build in in case they loose the signal.

This just means that they continuously calculate what the new range should be given the current GS towards or away from the DME.

So if the signal for some reason fails, the DME will continue to display theoretical calculated data for 5 to 10 seconds event though it has no signal.

If you continue to fly in the same general direction it will match quite nicely, but if you for some reason turn just when the signal is lost, you have 5 to 10 seconds of false indication.
lasseb is offline  
Old 16th Mar 2010, 00:20
  #12 (permalink)  
 
Join Date: Oct 2003
Location: The Peaks
Age: 45
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts
most modern airliners use DME/DME as the primary navigation sorce
My aircraft uses GPS. Then DME DME. Then IRS.
capt.sparrow is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.