VFR flight planning and navigation software I've written
Join Date: Apr 2008
Location: North Wales
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Tim.
I don't seem to be able to change the "Weather station proximity to route distance" it's set to 15 nm but when I type in a new figure and click ok then close it, it defaults back to 15.
I fly from Caernarfon and we always use Valley weather so I'd like that to display.
When generating a route plan from Caernarfon to where ever, I'd like Valley frequencies to display on the printed plan as well. Is this possible?
Using the latest V.0.9.7.21959
Thanks.
I don't seem to be able to change the "Weather station proximity to route distance" it's set to 15 nm but when I type in a new figure and click ok then close it, it defaults back to 15.
I fly from Caernarfon and we always use Valley weather so I'd like that to display.
When generating a route plan from Caernarfon to where ever, I'd like Valley frequencies to display on the printed plan as well. Is this possible?
Using the latest V.0.9.7.21959
Thanks.
Thread Starter
Join Date: May 2007
Location: Compton Abbas
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
CR, cheers, artwork hasn't been done yet but should make an appearance before v1 is finished. There's no way to get the enroute features display ont he PLOG I'm afraid.
Robin Driver, 15nm is the maximum distance from the route in which SkyAngel can look for features (including weather stations) at the moment. Unfortunately there is no way to specify that a certain radio station is always included on the PLOG either; this is something I want to get done in a post-v1 release.
Robin Driver, 15nm is the maximum distance from the route in which SkyAngel can look for features (including weather stations) at the moment. Unfortunately there is no way to specify that a certain radio station is always included on the PLOG either; this is something I want to get done in a post-v1 release.
Join Date: Feb 2009
Location: Cornwall
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Another question... Is there anyway to save the PLOG as a word doc so that it can be saved and printed off another pc without the main programme? (I rarely have ink in my printer)
Join Date: Apr 2004
Location: UK
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Another question... Is there anyway to save the PLOG as a word doc so that it can be saved and printed off another pc without the main programme? (I rarely have ink in my printer)
Thread Starter
Join Date: May 2007
Location: Compton Abbas
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
There are two ways of accomplishing what you want:
1. Right click the document -> view source -> save, this will save as a .html document that can be viewed on any computer.
2. Print to XPS or PDF or Document Writer or any other print-to-file facility available in the list of "printers" that you can choose from. This is what those facilities are designed for; so that you can take that file to another computer and print it there.
1. Right click the document -> view source -> save, this will save as a .html document that can be viewed on any computer.
2. Print to XPS or PDF or Document Writer or any other print-to-file facility available in the list of "printers" that you can choose from. This is what those facilities are designed for; so that you can take that file to another computer and print it there.
Join Date: Jun 2009
Location: London
Age: 48
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
If you can code it for Macs then possibly an iPhone app would be the next move? I've just downloaded a program for my iPhone called copilot for £12 which has 10% of the features SkyAngel has. You could price it double that of copilot, make an absolute killing and I'd be your first customer!
I love it, I'm still trying to work it all out but at first impression, I'm extremely impressed.
I love it, I'm still trying to work it all out but at first impression, I'm extremely impressed.
Thread Starter
Join Date: May 2007
Location: Compton Abbas
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
SkyAngel 0.9.8 Released!
A new version of SkyAngel, version 0.9.8, has been posted. This version has mainly bug fixes but there are some data and functionality improvements too. Note that in Plan, I have changed some of the colours in this release to match the CAA charts. This is an experiment: if most people prefer the old colours, I'll switch back in the next release. Please let me know!
Also note that there is now a forum on the SkyAngel website for discussion of the product, compatible GPS devices, suggestions for future features etc.
In this release:
Data
----
Spot elevations now included on chart and in MSA calculations
UK FIS sector information now included so London Info will appear in PLOG
InFlight
--------
Data loading time halved
Fixed "invalid land polygon" bug that some people were experiencing
Plan
----
Scale added to main map
Save option added to PLOG viewer, to facilitate editing of default output
3D terrain shading colours are now rounded, making it useful for determining elevation while still retaining shading
The default (first) aircraft can now be removed
More intelligent selection of frequencies included on PLOG
Also note that there is now a forum on the SkyAngel website for discussion of the product, compatible GPS devices, suggestions for future features etc.
In this release:
Data
----
Spot elevations now included on chart and in MSA calculations
UK FIS sector information now included so London Info will appear in PLOG
InFlight
--------
Data loading time halved
Fixed "invalid land polygon" bug that some people were experiencing
Plan
----
Scale added to main map
Save option added to PLOG viewer, to facilitate editing of default output
3D terrain shading colours are now rounded, making it useful for determining elevation while still retaining shading
The default (first) aircraft can now be removed
More intelligent selection of frequencies included on PLOG
Join Date: Nov 2008
Location: Cambridge, UK
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Version 0.9.8 seems to have an issue. I uninstalled the previous verrsion & installed - then:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at Divelements.Mapping.ComplexGeometry.xed3e11f57244d7cb()
at Divelements.Mapping.TwoDimensionalGeometry.GetPoints()
at Divelements.Aviation.FlightPlanner.Rendering.x2c1c98f7e7ef4c 48.x1a89deb7cc499658(GeometryEntity x4181df4cd38a69a0)
at Divelements.Aviation.FlightPlanner.Rendering.x2c1c98f7e7ef4c 48.x309a321eaca6b213(GeometryEntity x4181df4cd38a69a0)
at Divelements.Aviation.FlightPlanner.Rendering.x2c1c98f7e7ef4c 48.xdde427ad235f604b(Graphics x41347a961b838962, GeometryEntity xa9a706768ab5b5b1, Pen x90279591611601bc)
at Divelements.Aviation.FlightPlanner.Rendering.xc33d26eab04d79 57.x32e22c96910a9b10(x2c1c98f7e7ef4c48 xd0bb5d9c9ba91857, xd7cb7ac31049ffae x0f7b23d1c393aed9, AirspaceEntity xa9a706768ab5b5b1)
at Divelements.Aviation.FlightPlanner.Rendering.x867d3d2864d7f7 d1.DrawGeometryEntity(xd7cb7ac31049ffae context, GeometryEntity entity)
at Divelements.Aviation.FlightPlanner.Rendering.x2c1c98f7e7ef4c 48.xe406325e56f74b46(Graphics x41347a961b838962, Rectangle xe831729bf4ec9571)
at Divelements.Aviation.FlightPlanner.Rendering.x970ba8497cedc7 24.OnPaint(PaintEventArgs e)
at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEve ntArgs e, Int16 layer, Boolean disposeEventArgs)
at System.Windows.Forms.Control.WmPaint(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Mes sage& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
SkyAngel
Assembly Version: 0.9.8.16605
Win32 Version: 0.9.8.16605
CodeBase: file:///C:/Program%20Files%20(x86)/Divelements%20Limited/SkyAngel%20Plan/SkyAngel.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Divelements.SandGrid
Assembly Version: 2.2.1.1
Win32 Version: 2.2.1.1
CodeBase: file:///C:/Program%20Files%20(x86)/Divelements%20Limited/SkyAngel%20Plan/Divelements.SandGrid.DLL
----------------------------------------
SandDock
Assembly Version: 3.0.5.1
Win32 Version: 3.0.5.1
CodeBase: file:///C:/Program%20Files%20(x86)/Divelements%20Limited/SkyAngel%20Plan/SandDock.DLL
----------------------------------------
SandBar
Assembly Version: 1.4.2.1
Win32 Version: 1.4.2.1
CodeBase: file:///C:/Program%20Files%20(x86)/Divelements%20Limited/SkyAngel%20Plan/SandBar.DLL
----------------------------------------
System.Web.Services
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
To be sure I uninstalled, rebooted and installed a fresh download. Same again.
Any ideas?
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at Divelements.Mapping.ComplexGeometry.xed3e11f57244d7cb()
at Divelements.Mapping.TwoDimensionalGeometry.GetPoints()
at Divelements.Aviation.FlightPlanner.Rendering.x2c1c98f7e7ef4c 48.x1a89deb7cc499658(GeometryEntity x4181df4cd38a69a0)
at Divelements.Aviation.FlightPlanner.Rendering.x2c1c98f7e7ef4c 48.x309a321eaca6b213(GeometryEntity x4181df4cd38a69a0)
at Divelements.Aviation.FlightPlanner.Rendering.x2c1c98f7e7ef4c 48.xdde427ad235f604b(Graphics x41347a961b838962, GeometryEntity xa9a706768ab5b5b1, Pen x90279591611601bc)
at Divelements.Aviation.FlightPlanner.Rendering.xc33d26eab04d79 57.x32e22c96910a9b10(x2c1c98f7e7ef4c48 xd0bb5d9c9ba91857, xd7cb7ac31049ffae x0f7b23d1c393aed9, AirspaceEntity xa9a706768ab5b5b1)
at Divelements.Aviation.FlightPlanner.Rendering.x867d3d2864d7f7 d1.DrawGeometryEntity(xd7cb7ac31049ffae context, GeometryEntity entity)
at Divelements.Aviation.FlightPlanner.Rendering.x2c1c98f7e7ef4c 48.xe406325e56f74b46(Graphics x41347a961b838962, Rectangle xe831729bf4ec9571)
at Divelements.Aviation.FlightPlanner.Rendering.x970ba8497cedc7 24.OnPaint(PaintEventArgs e)
at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEve ntArgs e, Int16 layer, Boolean disposeEventArgs)
at System.Windows.Forms.Control.WmPaint(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Mes sage& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
SkyAngel
Assembly Version: 0.9.8.16605
Win32 Version: 0.9.8.16605
CodeBase: file:///C:/Program%20Files%20(x86)/Divelements%20Limited/SkyAngel%20Plan/SkyAngel.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Divelements.SandGrid
Assembly Version: 2.2.1.1
Win32 Version: 2.2.1.1
CodeBase: file:///C:/Program%20Files%20(x86)/Divelements%20Limited/SkyAngel%20Plan/Divelements.SandGrid.DLL
----------------------------------------
SandDock
Assembly Version: 3.0.5.1
Win32 Version: 3.0.5.1
CodeBase: file:///C:/Program%20Files%20(x86)/Divelements%20Limited/SkyAngel%20Plan/SandDock.DLL
----------------------------------------
SandBar
Assembly Version: 1.4.2.1
Win32 Version: 1.4.2.1
CodeBase: file:///C:/Program%20Files%20(x86)/Divelements%20Limited/SkyAngel%20Plan/SandBar.DLL
----------------------------------------
System.Web.Services
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4918 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
To be sure I uninstalled, rebooted and installed a fresh download. Same again.
Any ideas?
Join Date: Oct 2009
Location: Sparks, NV
Age: 77
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
How to get terrain for Nevada
I live in Nevada, near Reno. I've installed the USA dem file, and the California one. I can see terrain in CA, but not in NV. There was no file for NV. Where do they come from, how are they made, etc? How do I get to see the terrain and airports for NV?
Thanks,
NVFlyingMonkey
Thanks,
NVFlyingMonkey
Thread Starter
Join Date: May 2007
Location: Compton Abbas
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
yakker, if a road is missing it means it's older than the public-domain vector map data I'm using. For the moment there isn't much I can do about this.
Daultonio, at the moment it's being updated every week (not this week though) and requries you to uninstall your old one, and install the new one. There will be automatic updates in a future version.
cct, I'm looking into that bug, a few people have reported it and I haven't yet gotten to the bottom of it.
NVFlyingMonkey, I'll post the Nevada file this coming weekend along with a few more states. I haven't quite decided yet how I'm going to bundle USA data together.
Daultonio, at the moment it's being updated every week (not this week though) and requries you to uninstall your old one, and install the new one. There will be automatic updates in a future version.
cct, I'm looking into that bug, a few people have reported it and I haven't yet gotten to the bottom of it.
NVFlyingMonkey, I'll post the Nevada file this coming weekend along with a few more states. I haven't quite decided yet how I'm going to bundle USA data together.
Join Date: Aug 2008
Location: Hertfordshire
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi Tim,
I love the software. I bought Flitestar VFR this year and have given up with it despite the cost as it was just too complicated and slow to do anything. Your software is far more intuitive and gives all the information and more that I want.
Thanks
Steve
I love the software. I bought Flitestar VFR this year and have given up with it despite the cost as it was just too complicated and slow to do anything. Your software is far more intuitive and gives all the information and more that I want.
Thanks
Steve
Join Date: Oct 2009
Location: Bristol
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I've loaded this on my laptop and reckon its brilliant, are you recommending a portable device for inflight use? I have an iPaq 314 which has now died for the second time and although it's a great piece of kit I won't chance it failing again and would like to replace it with something that will run your software in flight. Obviously a large screen would be good maybe 5" - 7" is there something that would suit?
Last edited by gsjefferies; 2nd Nov 2009 at 22:37.
Join Date: Nov 2009
Location: Lincs
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Tim, more congratulations on producing a great application,and thank you for the great convenience. I'd like to contribute a few suggestions.
I very much like the new chart colouring in 0.9.8.
The ability to print the chart view would be greatly advantageous for route familiarisation before flights. I fully accept the need to have a CAA chart plotted and in the cockpit always, but the subset of information which could be printed from SkyAngel would be very convenient pre-flight.
Is there any argument against printing out the wonderful en-route features? This will be a huge safety feature and a great help to all of us.
Can I set my home airfield (Conington in my case) as the centre of the screen on start-up? I don't often get down to the wilds of the beautiful south-west!
When I double-click on a route segment, I get an unhandled exception error - which is a surprising outcome. When I select 'Continue' and then enter new altitude and speed for that segment, the values don't appear to be accepted. Am I doing something wrong?
I hope these help, and I'm pleased to be able to contribute to the development of such a useful and well-designed product. I'm running it on the 'production' version of Windows 7 Professional without any difficulty, by the way.
I very much like the new chart colouring in 0.9.8.
The ability to print the chart view would be greatly advantageous for route familiarisation before flights. I fully accept the need to have a CAA chart plotted and in the cockpit always, but the subset of information which could be printed from SkyAngel would be very convenient pre-flight.
Is there any argument against printing out the wonderful en-route features? This will be a huge safety feature and a great help to all of us.
Can I set my home airfield (Conington in my case) as the centre of the screen on start-up? I don't often get down to the wilds of the beautiful south-west!
When I double-click on a route segment, I get an unhandled exception error - which is a surprising outcome. When I select 'Continue' and then enter new altitude and speed for that segment, the values don't appear to be accepted. Am I doing something wrong?
I hope these help, and I'm pleased to be able to contribute to the development of such a useful and well-designed product. I'm running it on the 'production' version of Windows 7 Professional without any difficulty, by the way.
Thread Starter
Join Date: May 2007
Location: Compton Abbas
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Thanks OldVicar, there's a bug in the 0.9.8 release whereby you'll get that exception if you double-click on a route segment where one of the ends is not on a recognised waypoint. It's been fixed ready for this week's release.
There are a few technical reasons why printing the chart displays isn't currently available as well as my fear that someone might try and use it as a "chart" in the cockpit. I can imagine the enroute features window becoming printable before the main map is, but neither will happen before version 1 release.
The map should remember the last thing you were looking at, it certainly shouldn't take you back to the south-west every time you start it.
There are a few technical reasons why printing the chart displays isn't currently available as well as my fear that someone might try and use it as a "chart" in the cockpit. I can imagine the enroute features window becoming printable before the main map is, but neither will happen before version 1 release.
The map should remember the last thing you were looking at, it certainly shouldn't take you back to the south-west every time you start it.