Turbine C210
Thread Starter
Join Date: May 2009
Location: new zealand
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Turbine C210
Hello
Anyone got some hands on experience with one?.
Have done the usual Google stuff, Soloy etc, Silver Eagle.
After a rough conversion cost (dont need to be pressurised), running cost etc.
Any info or ideas would be appreciated.
Thankyou 33
Anyone got some hands on experience with one?.
Have done the usual Google stuff, Soloy etc, Silver Eagle.
After a rough conversion cost (dont need to be pressurised), running cost etc.
Any info or ideas would be appreciated.
Thankyou 33
Sprucegoose
Join Date: Sep 2000
Location: Hughes Point, where life is great! Was also resident on page 13, but now I'm lost in Cyberspace....
Age: 59
Posts: 3,485
Likes: 0
Received 1 Like
on
1 Post
What's the point of having a turbine if it's not pressurised? Fuel flow will almost halve at 20,000 feet compared to 10,000!
Join Date: Jul 2005
Location: Queensland
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
Keep in mind that in Oz temp is generally above ISA often well above and that slows turbine powered aircraft down. The 215K in the pretty brochure is suddenly 195K or worse.Seems to be a lot of cash for a modest increase in speed. The NM/litre is only 65%of a normally aspirated 210 . You'd get a lot more bang for your buck installing a continental io550p. Ignoring fiscal common sense I love the climb rate and the TO and landing distances.
Cheers RA
Cheers RA
When you live....
Gross weight
I know a guy who had paid his deposit and was ready to take delivery/ship to Oz when he discovered that the conversion was so over the advertised ZFW that it became a one person/full fuel aircraft.
He also talked about a few crashes in the US that were caused by CofG issues stemming from an inability to to load it properly.
UTR
He also talked about a few crashes in the US that were caused by CofG issues stemming from an inability to to load it properly.
UTR
Was there not a US-registered example that came to grief somewhere near Armidale about 10 or 12 years back? Don't remember too many details, but have a vague recollection that it was turbulence related.
Is Va still 117KIAS after the conversion?
Is Va still 117KIAS after the conversion?
Join Date: Jan 2008
Location: Australia
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Va and Vne stay the same, they are airframe limits, it is hard to see the point of Turbine conversion as the cost of turbine O haul / HSI is way more than the o haul cost of the trusty IO 520
From what I remember Vmo (as opposed to Vno) is at the top of the green in turbines, which means the quickest you can go in a turbine 210 will be around 166kts indicated. There's no yellow arc on the airspeed indicator and no Vne as such (201kts on IO-520 powered 210 that I fly).
Join Date: Jun 2001
Location: Enroute from Dagobah to Tatooine...!
Posts: 791
Likes: 0
Received 1 Like
on
1 Post
Mate, for very little extra you could have a brand new engine and brand new airframe which could fit 10 people (plus a 450kg cargo pod if you want) in the form of a PAC750XL. I know of companies who have considered turbine conversions and then gone for this route instead. WAY better return on your investment and productivity prospects.
Join Date: Apr 2011
Location: Australia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Hello
Anyone got some hands on experience with one?.
Have done the usual Google stuff, Soloy etc, Silver Eagle.
After a rough conversion cost (dont need to be pressurised), running cost etc.
Any info or ideas would be appreciated.
Thankyou 33
Anyone got some hands on experience with one?.
Have done the usual Google stuff, Soloy etc, Silver Eagle.
After a rough conversion cost (dont need to be pressurised), running cost etc.
Any info or ideas would be appreciated.
Thankyou 33
Thread Starter
Join Date: May 2009
Location: new zealand
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for your replys
Basically Im looking for a low level survey aircraft hence the no pressurisatiuon.
Yes the PAC is the ultimate but at around $1.6+ it is pricey and if you are only running on wing tanks you can still only do the same if not less production as a C210 piston.
Im after turbine for power to weight and obviously saftey aswell.
A repowered fletcher with a PT6-21 ??, AT502 ??.
Any ideas chaps.
Looking foward to your colourful replys......
Basically Im looking for a low level survey aircraft hence the no pressurisatiuon.
Yes the PAC is the ultimate but at around $1.6+ it is pricey and if you are only running on wing tanks you can still only do the same if not less production as a C210 piston.
Im after turbine for power to weight and obviously saftey aswell.
A repowered fletcher with a PT6-21 ??, AT502 ??.
Any ideas chaps.
Looking foward to your colourful replys......
Join Date: Nov 2007
Location: Mars
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
O&N are pretty much the only ones to consider. They now do a Non-Pressurised conversion.
it is still mega $$ as far as I am aware.
Yes with the P210 Silver Eagle conversion there was some recent MAJOR issues with the BEW of the plane making it almost useless.
I understand O & N are doing some major works in reducing the BEW.
The Non Pressurised conversions may not have that problem but I have not heard of anyone doing one.
it is still mega $$ as far as I am aware.
Yes with the P210 Silver Eagle conversion there was some recent MAJOR issues with the BEW of the plane making it almost useless.
I understand O & N are doing some major works in reducing the BEW.
The Non Pressurised conversions may not have that problem but I have not heard of anyone doing one.
As gassed budgie mentioned when converting a piston arframe to a turboprop the airspeed limit is reduced.
No matter what the aircraft type being converted the Vno becomes the Vmo of the conversion.
Your old Vne no longer exists.
This is a requirement in FAR23 I think. I read an article fully explaining the reasons for this many years ago after seeing many converted aircraft types in the US.
One example was the conversion of the Piper Malibu to a t/prop. It was cheaper than buying a Meridian or TB850.
That difference is usually a large difference, as GB said for eg 166KIAS down from 201.
Being limited to such a low speed especially on descents will be a hassle. Most pressurized t/props will often be descending,in smooth air of course, at a speed up close to Vmo, compliant with airspace/atc speed limits.
No matter what the aircraft type being converted the Vno becomes the Vmo of the conversion.
Your old Vne no longer exists.
This is a requirement in FAR23 I think. I read an article fully explaining the reasons for this many years ago after seeing many converted aircraft types in the US.
One example was the conversion of the Piper Malibu to a t/prop. It was cheaper than buying a Meridian or TB850.
That difference is usually a large difference, as GB said for eg 166KIAS down from 201.
Being limited to such a low speed especially on descents will be a hassle. Most pressurized t/props will often be descending,in smooth air of course, at a speed up close to Vmo, compliant with airspace/atc speed limits.
Last edited by aussie027; 12th Sep 2011 at 05:58.
What kind of survey? I ask because if it's photo the Turbine exhaust plume effects the quality of the photos. If you don't need pressurization how about a Soloy 206. There is a nice Mk 1 for sale in Australia for under $500K and a newish Mk2 in the states for $845K.
M & O operating cost for the Rolls engines is under $100 per hour fuel flow 26US gph.
Contact www.soloy.com for details.
M & O operating cost for the Rolls engines is under $100 per hour fuel flow 26US gph.
Contact www.soloy.com for details.
Join Date: Mar 2010
Location: Smog Central
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
The chief engineer in Naracourte SA did a conversion. Sliced some of the wings off and put a kero burner in the front. Might be worth giving them a call, interesting project.
Have you considered about over-stressing the a/c with that sort of power in the front especially in summer when there is only really a good three hours in the day where it is not rough as guts at survey height? Kind of pointless if you are running it at half power most of the time. Data is not going to look that good either if you are screaming over peaks at around 200kts.
Have you considered about over-stressing the a/c with that sort of power in the front especially in summer when there is only really a good three hours in the day where it is not rough as guts at survey height? Kind of pointless if you are running it at half power most of the time. Data is not going to look that good either if you are screaming over peaks at around 200kts.