L29 Overrun at North Shore NZ
Thread Starter
Join Date: Oct 2007
Location: .
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: Aug 2006
Location: Duckberg
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
A large number of fire fighters were at the scene, and had applied foam as a precaution, Mr Phillips said.
I haven't seen a pic of the aircraft but it sounds like the damage was minimal, happy to be corrected if that was not the case...
LP
I've watched it doing circuits at Ardmore a few times - needless to say the initial climb rate seems to leave a little to be desired. The owner has another one, -SSU. Damage doesn't look too bad in the photo although I suppose pictures don't always tell the whole story.
Join Date: Jun 1997
Location: auckland, new zealand
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Mattath
Nobody made me Thread Prefect but...
If I wanted to read an unsubstantiated rant
(I heard....... the rumor was...... probably went thru the firewall cause he was .....)
I really would prefer half-decent spelling and grammar:
1. Try to use complete sentences (the first word generally starts with a capital letter; the sentence is often considered best ended with a full stop).
2. Try to use the words that don't make the sentence nonsense e.g don't use "cause" when you mean "because".
Apart from the English your post was pretty much a waste of bandwidth, better off in Jetblast or R&N.
Nobody made me Thread Prefect but...
If I wanted to read an unsubstantiated rant
(I heard....... the rumor was...... probably went thru the firewall cause he was .....)
I really would prefer half-decent spelling and grammar:
1. Try to use complete sentences (the first word generally starts with a capital letter; the sentence is often considered best ended with a full stop).
2. Try to use the words that don't make the sentence nonsense e.g don't use "cause" when you mean "because".
Apart from the English your post was pretty much a waste of bandwidth, better off in Jetblast or R&N.
Join Date: Dec 2008
Location: New Zealand
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Did you see the original Herald article? Did you see the picture on it?
Only with Aunty Herald - that is not jet powered, it is not Czech made, it is not a military aircraft and it is not all that vintage. (Picture pinched from another forum, but seeing as it's now been changed...)
Only with Aunty Herald - that is not jet powered, it is not Czech made, it is not a military aircraft and it is not all that vintage. (Picture pinched from another forum, but seeing as it's now been changed...)
Join Date: Jan 2004
Location: Where the beer is cold and the weather is colder.
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
"Wouldn't NE be a bit marginal for an L29? Even on a perfect day?"
It would seem so.
Talk to the GBA boys about getting a cherokee 6 out of there on a warm day, let alone a low powered jet. would be interesting to see the performance figures.
It would seem so.
Talk to the GBA boys about getting a cherokee 6 out of there on a warm day, let alone a low powered jet. would be interesting to see the performance figures.
Join Date: May 2005
Location: gutter
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
That piece of s**t and it's owner will hopefully go somewhere far far away and not put any one elses life at risk......
Brake failure - yeah right........an arrestor hook wouldn't have stopped that thing!
Brake failure - yeah right........an arrestor hook wouldn't have stopped that thing!
Join Date: Dec 2008
Location: New Zealand
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
mattathm is having week off
Judging from many of his/her other posts one could be forgiven if the time in the Sin Bin wasn't quite bit longer.
Dairy Flat is hardly the longest runway around. If he was told he shouldn't be trying it, he shouldn't have tried it.
Join Date: Sep 2006
Location: back of the crew bus
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Inexperienced rich boys and their toys... the continuing saga...
Slightly off-topic - wasn't the SSS rego worn by a Grumman Cougar? Anyone know what happened to it?
Slightly off-topic - wasn't the SSS rego worn by a Grumman Cougar? Anyone know what happened to it?
Join Date: Oct 2007
Location: Dr. Evil's secret volcano lair
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Yes that piece of junk is now Registered PAP but as of about a month ago has been grounded due corrosion on the main spar or similar and will never fly in the skys of nz again. Thank god
Join Date: Dec 2004
Location: back to the land of small pay and big bills
Age: 50
Posts: 1,218
Likes: 0
Received 0 Likes
on
0 Posts
Yeah..being parted out on trademe last month..
..in defence of Mattathm..from what I've heard from other sources..everything he said about the owner is true.
..give him a break Mods..he has Tourettes in his fingers
..in defence of Mattathm..from what I've heard from other sources..everything he said about the owner is true.
..give him a break Mods..he has Tourettes in his fingers
Join Date: Sep 2006
Location: back of the crew bus
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Did my multi Instrument rating in that piece of junk, 20-odd years ago. Horribly underpowered, but it did have a decent flight director and AP, Was pretty spiffy in those days (compared to say a Seneca 1 or an Aztec).
Re: Sss, Tad?, Pap
Sorry for further thread drift
Only flew it once, about 9 years ago. Seemed to me to be an OK aircraft especially as a multi IFR trainer, true not over powered, but certainly wouldn't have called it a heap of junk. Amazing how our perceptions differ.
that piece of junk is now Registered PAP
will never fly in the skys of nz again. Thank god
Did my multi Instrument rating in that piece of junk, 20-odd years ago
Join Date: Oct 2007
Location: Dr. Evil's secret volcano lair
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Without intentionally drifting the thread further, it just ain't worth it's own thread, sorry
It might have been ok 9 years ago but isn't the best machine around now. Always breaking down, parts are hard to come by so out of the air a lot, things not working, things falling off, shabby this, ripped that etc etc need I go on ??
There would be more knobs/leavers/buttons etc in that plane without their handles/knobs whatever that there would be with them on
And to top it all off, it has been replaced by none other than VH-MEP, for those that know that old chariot
It might have been ok 9 years ago but isn't the best machine around now. Always breaking down, parts are hard to come by so out of the air a lot, things not working, things falling off, shabby this, ripped that etc etc need I go on ??
There would be more knobs/leavers/buttons etc in that plane without their handles/knobs whatever that there would be with them on
And to top it all off, it has been replaced by none other than VH-MEP, for those that know that old chariot