CL44-O N447FT
Thread Starter
Join Date: May 2003
Location: Hampshire UK
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
CL44-O N447FT
OFFICIAL-READ ALL ABOUT IT!
Not our word but that of the official powers that be.
All contained in our Newsletter which will hit the streets next week.
So its now official despite all the Ozzie and Yankee gossip. To get your copy
and join the Association email [email protected]
Not our word but that of the official powers that be.
All contained in our Newsletter which will hit the streets next week.
So its now official despite all the Ozzie and Yankee gossip. To get your copy
and join the Association email [email protected]
I could never quite understand what was so wonderful about N447T. It certainly did have a voluminous cargo bay but the arse-end was about 12 feet above the ramp.
I can remember parking alongside N447T (when she was with TMAC) in my Belfast. the TMAC captain and F/O came over and had coffee with us upstairs on the flight deck. They were trying to unload a large 6-wheeled oil industry seismic truck (which weighed a lot) and the last 12 feet down to the ramp was proving rather difficult and time consuming.
As far as I can remember, they had no less than 7 pieces of ground equipment involved in the unloading process. Two GPUs were attached to the nose jacking points to stop it from sitting on its arse whilst at the back, two large forklifts were supporting the HILO which wasn't strong enough to take the weight of the truck.
Whilst all this was going on we sat there drinking our coffees reflecting with the TMAC crew just how difficult life could be. Meanwhile, the rest of the world was driving up and down our ramp with no difficulty at all. (Our usual load into Tehran was an awful lot of Chieftain tank gearboxes. I was told that the locals couldn't get them out of 2nd gear so they didn't bother - with the inevitable results).
Of course, the other problem with the CL-44 was that it needed a start-cart whereas the belfast had electric start.
Happy Days.
I can remember parking alongside N447T (when she was with TMAC) in my Belfast. the TMAC captain and F/O came over and had coffee with us upstairs on the flight deck. They were trying to unload a large 6-wheeled oil industry seismic truck (which weighed a lot) and the last 12 feet down to the ramp was proving rather difficult and time consuming.
As far as I can remember, they had no less than 7 pieces of ground equipment involved in the unloading process. Two GPUs were attached to the nose jacking points to stop it from sitting on its arse whilst at the back, two large forklifts were supporting the HILO which wasn't strong enough to take the weight of the truck.
Whilst all this was going on we sat there drinking our coffees reflecting with the TMAC crew just how difficult life could be. Meanwhile, the rest of the world was driving up and down our ramp with no difficulty at all. (Our usual load into Tehran was an awful lot of Chieftain tank gearboxes. I was told that the locals couldn't get them out of 2nd gear so they didn't bother - with the inevitable results).
Of course, the other problem with the CL-44 was that it needed a start-cart whereas the belfast had electric start.
Happy Days.
I have absolutely no idea. I got mildly involved on the periphery of a possible Canadian deal last year and did suggest that they were looking at the wrong aircraft for what they needed it to do. I would imagine it came to nothing.
Thread Starter
Join Date: May 2003
Location: Hampshire UK
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
CL44 ASSOCIATION-MEMBERSHIP
The Association is looking for new members who may be able to assist in its
forthcoming endeavours -no previous experience needed-but helpful
Reply to this address in the first place-thanks
forthcoming endeavours -no previous experience needed-but helpful
Reply to this address in the first place-thanks
Join Date: Mar 2012
Location: Florida USA
Age: 61
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Belfast and CL44 engines RR Tyne do not have Type certificate a quick check on the internet/EASA/FAA websites nor Manufacturers support. The Belfast Type Certificate cancelled by EASA/British CAA big red writing over the type certificate CANCELLED ( in red ). Neither aircraft have any current crews and doubt you would find any type rated crew left let alone willing to have a fly. The aircraft must be a rich boys dream or a con job/fraud on investors ? Investors putting in money at the assurance of the engineers/mechanics saying they can get the two aircraft flying, just to take the investors money and skim off the top or maybe purely have someone else pay for their hobby ?......
Join Date: Oct 2009
Location: Netherlands
Age: 42
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Always there are replies like this, type certificate withdrawn, no support for the engines etc.... But still there is work done on both frames so imo it seems that not all is that negative....
Tynes are still suppored btw. Alantique and Transall are still flying powered by them.
Tynes are still suppored btw. Alantique and Transall are still flying powered by them.
Join Date: Mar 2012
Location: Florida USA
Age: 61
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Not being negative just stating regulatory facts in this day and age compliance is the word and these aircraft cannot comply for commercial ops...... The RR Tyne is only supported for Military operations and no longer for the civilian type certificate. In any case Germany etc have removed the aircraft mentioned from Military service.
Join Date: Feb 2006
Location: Hanging off the end of a thread
Posts: 33,051
Received 2,925 Likes
on
1,250 Posts
Not being negative just stating regulatory facts in this day and age compliance is the word and these aircraft cannot comply for commercial ops...... The RR Tyne is only supported for Military operations and no longer for the civilian type certificate. In any case Germany etc have removed the aircraft mentioned from Military service.