Go Back  PPRuNe Forums > Other Aircrew Forums > Flight Testing
Reload this Page >

Impact of system latency upon controllability ?


Notices
Flight Testing A forum for test pilots, flight test engineers, observers, telemetry and instrumentation engineers and anybody else involved in the demanding and complex business of testing aeroplanes, helicopters and equipment.

Impact of system latency upon controllability ?

Old 8th August 2017 | 17:00
  #1 (permalink)  
Thread Starter
Moderator
30 Countries Visited
25 Anniversary
Veteran: Reserves
 
Joined: Feb 2000
Aviation Qualifications: CPL
Posts: 14,480
Likes: 178
From: UK
Impact of system latency upon controllability ?

I've just been wading through a (non aviation) document on system latency that claims to be showing me some wonderful lessons about how critical system latency (input-response delay) is to controllability. No sh1t Sherlock!

However, when I went and had a rummage around the usual sources, I can't seem to find any good documentation to support what I believe I intuitively know either for aircraft, or the other obvious user of such principles - computer game design.

Can anybody point me at a good document on the topic?

G
Genghis the Engineer is offline  
Reply
Old 9th August 2017 | 09:55
  #2 (permalink)  
 
Joined: Jul 2007
Posts: 1,158
Likes: 62
From: 51.50N 1W (ish)
When I passed through NASA Dryden (Edwards AFB) in '69, they were doing some serious research on that, related to deliberate crashing an unmanned aircraft in a controlled way (they didn't wan't an uncontrolled crash, for some reason). I can't find anything from then in my library, but the first reference on the link below may be of relevance.

https://tinyurl.com/y7deuqjz
Fitter2 is offline  
Reply
Old 9th August 2017 | 11:08
  #3 (permalink)  
Thread Starter
Moderator
30 Countries Visited
25 Anniversary
Veteran: Reserves
 
Joined: Feb 2000
Aviation Qualifications: CPL
Posts: 14,480
Likes: 178
From: UK
Thanks Fitter, but I suspect it isn't. I can't see drone command signal latency having much relevance to the problem of control / FBW direct input response latency?

G
Genghis the Engineer is offline  
Reply
Old 9th August 2017 | 21:27
  #4 (permalink)  
20 Anniversary
 
Joined: Jan 2004
Aviation Qualifications: PPL
Posts: 239
Likes: 41
From: LIVT
This looks interesting:
https://etd.ohiolink.edu/pg_10?0::NO...yton1418340523
It presents a study carried out on a flight sim F-16 Flight Control System model, so I understand that the latency limits they found between a stable and unstable behaviour are related to the flight sim model they used and do not necessarily reflect what you would find on a real F-16. On the other side, I suppose the investigation method would be applicable to a real case as well.

The relevant paragraphs are 3.12 and 6.2.

Edit: The link to the .pdf file with the full text of the thesis is at the bottom of the webpage and not very conspicuous, so I enclose it below.
https://etd.ohiolink.edu/!etd.send_f...ion=attachment

Last edited by aerolearner; 9th August 2017 at 21:43. Reason: Add link to pdf
aerolearner is offline  
Reply
Old 9th August 2017 | 23:57
  #5 (permalink)  
 
Joined: Apr 2002
Posts: 734
Likes: 0
From: Nirvana South
Genghis,
Not my specialty as I more ensured that the overall AFCS met requirements & certification, but my recollection is that what you're asking was a fairly closely held outcome of programmes such as Bombardier's Active Control Technology (ACT) run in conjunction with Rockwell Collins' Flight Controls group. PM me if you need potential authors for a search.

A quick search on Latency on the SFTE website only brought up one paper but, again, my memory from around 10 years ago is that there were several such papers as smaller manufacturers looked at FBW. This is the link: https://www.sfte.org/component/conte...?paper_id=1264
ICT_SLB is offline  
Reply
Old 30th August 2017 | 03:22
  #6 (permalink)  
 
Joined: Apr 2002
Posts: 734
Likes: 0
From: Nirvana South
Genghis,
Just got this in an e-mail from the IET Digital Library.

Execution time analysis and optimisation techniques in the model-based development of a flight control software

This case study analyses the possibilities to improve the execution time of model-based developed software by applying optimisations during code generation and compilation. The present case study is performed on flight control software, for which safety aspects are accounted throughout the development. Therefore, a formally verified compiler is used for the optimisation during the compilation. The optimisation is evaluated by execution time measurements on the target and a static worst-case execution time analysis. Based on the results, recommendations for certain model patterns are given, which impact the worst-case execution time analysis.

http://digital-library.theiet.org/do...3CD80308BCDE83
ICT_SLB is offline  
Reply
Old 30th August 2017 | 11:59
  #7 (permalink)  
50 Countries Visited
25 Anniversary
 
Joined: Oct 1999
Aviation Qualifications: ATPL
Posts: 7,377
Likes: 933
From: Den Haag
My main exposure to latency has been in Full Flight Simulators. Some pertinent stuff here:
https://ntrs.nasa.gov/archive/nasa/c...0050192646.pdf
http://reports.nlr.nl/xmlui/bitstrea...pdf?sequence=1
212man is offline  
Reply
Old 31st August 2017 | 16:33
  #8 (permalink)  
Thread Starter
Moderator
30 Countries Visited
25 Anniversary
Veteran: Reserves
 
Joined: Feb 2000
Aviation Qualifications: CPL
Posts: 14,480
Likes: 178
From: UK
Thanks guys.

I've bounced the document (a paper sent to me to review by a "leading" academic journal) a strongly worded recommendation that they go off, talk to all or any of test pilots, simulator engineers and/or computer games designers and re-write it in the context of a chunk of real world experience. 212's documents I gave a special mention to.

PPrune at its best!

G
Genghis the Engineer is offline  
Reply
Old 1st September 2017 | 22:09
  #9 (permalink)  
 
Joined: Mar 2016
Posts: 12
Likes: 0
From: In a happy place
Genghis,

Any delay in visual representation of actual (or preceived) motion greater than 100ms will make an aircraft more difficult to control. A (test) pilot will report the delay as degraded aircraft handling properties, but it is actually poor performance of the (simulator) visual system of the PFD generator. The corollary is than a delay of less than 100ms is likely to be acceptable. No reference available I'm afraid, just hard won experience.

Phil
Phil_and_Sand is offline  
Reply
Old 5th September 2017 | 15:16
  #10 (permalink)  
Thread Starter
Moderator
30 Countries Visited
25 Anniversary
Veteran: Reserves
 
Joined: Feb 2000
Aviation Qualifications: CPL
Posts: 14,480
Likes: 178
From: UK
Well indeed - and I think that most flight testers (along with simulator engineers, computer game designers...) know all of that fairly intuitively - as you and I do.

The big surprise for me here was the lack of formal experimental evidence of this. After all, I'd not have to look at all hard, for example, for data relating stick force gradients to controllability, or damping to risk of divergent oscillatory modes.

G
Genghis the Engineer is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.