Flight preparation / weather minima
Thread Starter
Join Date: Nov 2009
Location: france
Age: 48
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Flight preparation / weather minima
hello
Could you please refresh my memory
when you prepare a flight , how do you check weather mimnima for:
T/off airport
landing airport
Take off alternates
Landing alternates
enroute alternates
I found that some dispatchers just check the "best" minimums for the airport:
for instance, taking the jeppesen charts, the airport has got an ILS, then they take those minima
others "degrade themselves"(it might not be proper english), that is, in the above example they would assume ILS is out, the they would take minima for a VOR approach for instance
some do that for all airports , somme only for landing airports......I found that everybody does it differently; The only thing they agee on is to take RVR for t/off airport
What is the correct way ?
I haven't found anything in the EUOPS
Thanks for your answer
Could you please refresh my memory
when you prepare a flight , how do you check weather mimnima for:
T/off airport
landing airport
Take off alternates
Landing alternates
enroute alternates
I found that some dispatchers just check the "best" minimums for the airport:
for instance, taking the jeppesen charts, the airport has got an ILS, then they take those minima
others "degrade themselves"(it might not be proper english), that is, in the above example they would assume ILS is out, the they would take minima for a VOR approach for instance
some do that for all airports , somme only for landing airports......I found that everybody does it differently; The only thing they agee on is to take RVR for t/off airport
What is the correct way ?
I haven't found anything in the EUOPS
Thanks for your answer
Join Date: Dec 2006
Location: Antigua
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
The correct way is to Compare the Minimums on plates for landing to the Forecast weather at your arrival for the Landing minimums. Whether or not the cloud cover and visibility forecast allows you to make the approach. When doing this you take into account what runways are available and if they have ILS or Other non precision approaches. This is because you might have a captain who is not qualified for a certain minimum. Take off Minimums are usually set unless the departure plate states that non standard minimums exist. In the US the rule for that one states all you need to take off is 1 statute mile down the runway if your in a twin engine aircraft. After take off you just shoot through the clouds. A take off alternate is considered if the ceiling and vis at time of departure do not allow you to turn around and see the runway under the clouds. In that case the T/O alternate is chosen must then be a particular distance from the Departure airport depending on the amount of engines the aircraft has. For example in the US the rule is with in 1 hour in still air with one engine inop for a twin engine aircraft. There is alot more to be said but i hope this helps.
Join Date: Nov 1999
Location: East Midlands
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
Charts and NOTAMS, is the simple answer. Never assume a degrade to airfield equipment. All relevent minima to be used, will be in your Ops Manual and may be increased from the 'Standard CATI 550m' by your published minima, ie Jepps, further increased by NOTAM or AIP.