Need some help in regards to the EGPWS database
Thread Starter
Join Date: Dec 2013
Location: HK
Age: 32
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Need some help in regards to the EGPWS database
Hi all,
when I tried to update the EGPWS database, I noticed that the card provided by Honeywell is way too expensive which I would never get the budget from my boss. Do you guys have any solution? I tried the PCMCIA ATA Card from TOPSSD, but seems I must use PCMCIA LF Card? Tks guys for your help
when I tried to update the EGPWS database, I noticed that the card provided by Honeywell is way too expensive which I would never get the budget from my boss. Do you guys have any solution? I tried the PCMCIA ATA Card from TOPSSD, but seems I must use PCMCIA LF Card? Tks guys for your help
Join Date: Aug 2007
Location: Spain
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Egpws
Your boss is not signing for the update. Its your responsibility and only the AMM or other document will give you the required way of doing it. Be a certifying tech/eng or you will find you can be pushed around for ever
N4790P
updates are mandatory by regulator.
However, I cannot find any reference to a specific regulatory requirement with regards to (the frequency of) updating EGPWS databases?
Can anyone point me in the right direction?
Join Date: Jul 2014
Location: U.S.A.
Age: 65
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Well, now I'm not so sure: I find a reference and is not an FAA SB, it's, I believe, an Honeywell SB 965-0976/1690-34-130 which states in pag 10. E> Compliance, that operator makes a decision if this conversion is necessary or not. If that is true, You have to live with that!
Happy Thanks Giving
Rgds
Happy Thanks Giving
Rgds
Join Date: Dec 2014
Location: UK
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hi, you need a linear flash and an omnidrive or similar to update the card for the Honeywell MK 5 and 7 cards, other than that it's basically a cut and paste of the files, you can't swap cards/ types
The MK 8 cards are an ATA card so can be done using a normal PCMCIA slot.
All the files are available to download if you have access to them via the Honeywell ADS site, it's also where you'll find any Nav D/B and tech pubs you have access to.
I've not seen any other options loaded to a Honeywell EGPWS and have always used the same database for all the aircraft I work on, but there are a few options listed.
The expensive part is really the omnidrive and linear flash as they work out at around $450 each. I can't comment on costs for the access to the databases.
If you set up access to the Honeywell site and ask for email notifications they update you when they're released, they find seen to update to any pattern and each type is not at the same time.
Hope this helps, what type are you wanting to update?
Mark
The MK 8 cards are an ATA card so can be done using a normal PCMCIA slot.
All the files are available to download if you have access to them via the Honeywell ADS site, it's also where you'll find any Nav D/B and tech pubs you have access to.
I've not seen any other options loaded to a Honeywell EGPWS and have always used the same database for all the aircraft I work on, but there are a few options listed.
The expensive part is really the omnidrive and linear flash as they work out at around $450 each. I can't comment on costs for the access to the databases.
If you set up access to the Honeywell site and ask for email notifications they update you when they're released, they find seen to update to any pattern and each type is not at the same time.
Hope this helps, what type are you wanting to update?
Mark
Join Date: Feb 2006
Location: Hanging off the end of a thread
Posts: 33,037
Received 2,910 Likes
on
1,247 Posts