Pin/socket manual
Thread Starter
Join Date: Jul 2003
Location: London
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Pin/socket manual
Many years ago I had a manual that enabled you find the part numbers of connector contacts by using the colour code on the contacts.
I think that it was called "the link" or "link manual".
Would anyone know if this is still available and where it can be obtained from.
I've tried on google but haven't been unable to find anything so it may no longer be in production, or it could be under a different name.
Thanks for any advice
I think that it was called "the link" or "link manual".
Would anyone know if this is still available and where it can be obtained from.
I've tried on google but haven't been unable to find anything so it may no longer be in production, or it could be under a different name.
Thanks for any advice
Join Date: Apr 2011
Location: old continent
Age: 46
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
previous post didn't pass
so here's the link again if you're looking for that
Daniels Manufacturing Corporation
so here's the link again if you're looking for that
Daniels Manufacturing Corporation
Join Date: Apr 2011
Location: old continent
Age: 46
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
we have a board of DMC that gives you pin/socket for basic plug/receptacle pn's
actually never used it, i only use a/c docs
maybe this can help you
Daniels Manufacturing Corporation
we have a board of DMC that gives you pin/socket for basic plug/receptacle pn's
actually never used it, i only use a/c docs
maybe this can help you
Daniels Manufacturing Corporation
Thread Starter
Join Date: Jul 2003
Location: London
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies and links.
I found the Pt No for the socket I was after by using the DMC website.
I will keep looking to see if I can find a hard copy of the manual that I'm after as a few of the places I work have very limited internet access so I may not be able to get back on to the DMC site in future.
I found the Pt No for the socket I was after by using the DMC website.
I will keep looking to see if I can find a hard copy of the manual that I'm after as a few of the places I work have very limited internet access so I may not be able to get back on to the DMC site in future.
Join Date: Apr 2011
Location: old continent
Age: 46
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Hello 419,
disregard the pm i send you, here's something way better.
http://www.dmctools.com/_pdf/Catalog...olingGuide.pdf
this link is on the bottom of their homepage, and at least you can print it, you get everything. plug to pin/socket pn's. gage,tooling pn, everything
disregard the pm i send you, here's something way better.
http://www.dmctools.com/_pdf/Catalog...olingGuide.pdf
this link is on the bottom of their homepage, and at least you can print it, you get everything. plug to pin/socket pn's. gage,tooling pn, everything
Thread Starter
Join Date: Jul 2003
Location: London
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Many thanks for that cedgz.
I'll print it ot when I get access to a good colour printer.
I'll print it ot when I get access to a good colour printer.