Identify Bendix Radar Model #
Thread Starter
Join Date: Aug 2004
Location: Houston, TX USA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Identify Bendix Radar Model #
Folks, would any of you be able to help me identify (and provide the model number) for the radar display unit installed in our club 1972 Piper Aztec E (normally aspirated) aircraft? See picture below.
https://picasaweb.google.com/suro.gh...DK9eqi64asqAE#
Looking to get an owners manual/pilot guide for this unit. Our original POH went missing and we're reconstructing documentation.
SG
https://picasaweb.google.com/suro.gh...DK9eqi64asqAE#
Looking to get an owners manual/pilot guide for this unit. Our original POH went missing and we're reconstructing documentation.
SG
Join Date: Jan 2008
Location: Glasgow
Age: 61
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
Bendix King IN-812A Color Radar Indicator?
It looks pre BendixRDR 2000.
I am going to say it is a Bendix King IN-812A Color Radar Indicator. Not definite though. Take the thing out and look at the back. That will definitely tell you.
I am not sure if yours is grey or black.
Part Number : Color Radar Indicator Description:
066-3114-00 Black panel color, 5/14/28 volt lighting
066-3114-01 Gray panel color, 5/14/28 volt lighting
I am going to say it is a Bendix King IN-812A Color Radar Indicator. Not definite though. Take the thing out and look at the back. That will definitely tell you.
I am not sure if yours is grey or black.
Part Number : Color Radar Indicator Description:
066-3114-00 Black panel color, 5/14/28 volt lighting
066-3114-01 Gray panel color, 5/14/28 volt lighting
Join Date: Nov 2007
Location: Too close to EASA
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Radar
It's the indicator for an RDS81/82/84/86 radar. You'd need to look at the scanner to see what system you actually have. It's the scanner that matters as this determines power output, range etc. This is a two-box radar system, so no separate transmitter/receiver unit - it's all in the scanner.
You can replace this indicator with an Avidyne EX600 MFD and get full moving map display (if you have a compatible GPS), charts, etc.
You can replace this indicator with an Avidyne EX600 MFD and get full moving map display (if you have a compatible GPS), charts, etc.