Cfm56-3/-7 Borescope Training
Thread Starter
Join Date: Dec 2005
Location: Spain
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Cfm56-3/-7 Borescope Training
Hi Folks,
I am looking for a Part-147 training facility where I can take a CFM56-3/-7 borescope inspection course, theory and OJT covering additional J-HOOK inspection practical training also.
Any advice about any facility where I can perform this training will be welcomed.
I appreciate your help with this matter.
Best Regards,
b737engineer
I am looking for a Part-147 training facility where I can take a CFM56-3/-7 borescope inspection course, theory and OJT covering additional J-HOOK inspection practical training also.
Any advice about any facility where I can perform this training will be welcomed.
I appreciate your help with this matter.
Best Regards,
b737engineer
Join Date: Nov 2003
Location: South West
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
I don't think you'll find any independent (non-airline) 147 orgs doing boroscope training. You may find an airline with 147 that does it.
The engine manufacturers do boroscope training including practical. For CFM56 you could try contacting GEAS at Nantgarw or the CFM training centre in France. A training certificate from the engine manufacturer will more than satisfy any Quality department.
The engine manufacturers do boroscope training including practical. For CFM56 you could try contacting GEAS at Nantgarw or the CFM training centre in France. A training certificate from the engine manufacturer will more than satisfy any Quality department.