Wikiposts
Search

Notices
Engineers & Technicians In this day and age of increased CRM and safety awareness, a forum for the guys and girls who keep our a/c serviceable.

Heavy landing report

Thread Tools
 
Search this Thread
 
Old 8th September 2005 | 07:56
  #1 (permalink)  
Thread Starter
20 Anniversary
 
Joined: Jun 2001
Posts: 447
Likes: 2
From: uk
Heavy landing report

Can anyone tell me the difference between VG min, VG max and VG land?

I had a heavy landing the other day with: (on the DFDMU)

VG min - 1.2
VG max - 2.0
VG land - 1.7

Our limit is 1.8 but i thought this was for land not max, whats the difference?

BB
Bluebaron is offline  
Old 14th September 2005 | 21:04
  #2 (permalink)  
Thread Starter
20 Anniversary
 
Joined: Jun 2001
Posts: 447
Likes: 2
From: uk
guess thats a no then!

BB
Bluebaron is offline  
Old 14th September 2005 | 22:41
  #3 (permalink)  
20 Anniversary
 
Joined: Mar 2005
Posts: 731
Likes: 0
From: England
What aircraft type are you referring to (Airbus?)
I can do some digging if you let us know.
Fargoo is offline  
Old 15th September 2005 | 00:35
  #4 (permalink)  
Cunning Artificer
20 Anniversary
 
Joined: Jun 2001
Posts: 3,125
Likes: 7
From: The spiritual home of DeHavilland
Lightbulb

I set up the flight data analysis system in our company several years ago and was trained in data analysis and also in aircraft accident investigation. From training and again confirmed by some work we did with Boeing - on a customer's aircraft that was "bent in the middle like a one string fiddle" with nothing spectaular on the record - I'd point out that instantaneous readings from a digital recording system are not conclusive in capturing the maximum G levels achieved. I don't know the sampling rate for vertical acceleration in your aircraft but it is generally 16 times a second with another couple of hundred parameters taken between each sample.

It would be dangerous to make assumptions about maximum 'G' simply from looking at a flight recording. I'm afraid that if the crew thought it might be a heavy landing and report it as such, you really must do a Heavy Landing Check. You can't simply write it off against a flight recording.
Blacksheep is offline  
Old 15th September 2005 | 17:05
  #5 (permalink)  
 
Joined: Jan 2002
Posts: 1,271
Likes: 0
From: West Country
I'm afraid that if the crew thought it might be a heavy landing and report it as such, you really must do a Heavy Landing Check. You can't simply write it off against a flight recording.
Not according to the Airbus TSM - if the figures from AIDS are below the parameters allowed in the TSM no further action is required.
Jet II is offline  
Old 16th September 2005 | 07:46
  #6 (permalink)  
Thread Starter
20 Anniversary
 
Joined: Jun 2001
Posts: 447
Likes: 2
From: uk
I'm operating a B757.

We thought it was a firm landing not a "heavy" one . I guess this depends on the crew.

The DFDMU generated a "heavy landing report". This is what surprised us. We thought we were ok as the Land G was only 1.7 and our upper limit is 1.8 only engineering stated that the "max" g is limiting at 2.0.


just wondering what the difference between "landing" and "max" G was.

BB
Bluebaron is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.