XP Control Panel problem
Thread Starter
Joined: Oct 2000
Posts: 8,266
Likes: 1
From: Berkshire, UK
XP Control Panel problem
Add/Remove progs list does not populate. The "torch" turns back and forth but no list appears. Furthermore, after a few minutes the PC locks solid - mouse remains stationary and Ctrl+Alt+Del does not work. I have to switch the PC off and restart. I've tried lots of forums for answers but none works. Have tried a System Restore and SFC /Scannow to no avail.
I had this problem sometime ago and solved it quickly but my brain can't recall how I did it.
Any clues please?
Thanks.
I had this problem sometime ago and solved it quickly but my brain can't recall how I did it.
Any clues please?
Thanks.
More bang for your buck
Joined: Nov 2005
Posts: 3,513
Likes: 1
From: land of the clanger
From Microsoft
Try Start>Run>regsvr32 appwiz.cpl [enter] if no good then:
one of the most common causes for Add/Remove Programs being blank is that a recent install/uninstall routine may have wiped out the contents of the entire "Uninstall" registry key here:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion \Uninstall
Each sub-key stores the Display Name, UninstallString information for a program that you installed. Open Regedit.exe and navigate to the above key. Check if the "Uninstall" key is empty (contains no sub-keys). In that case, your best best is to rollback the system state using System Restore.
I know you've tried restore but it would perhaps help to pin point the problem
Try Start>Run>regsvr32 appwiz.cpl [enter] if no good then:
one of the most common causes for Add/Remove Programs being blank is that a recent install/uninstall routine may have wiped out the contents of the entire "Uninstall" registry key here:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion \Uninstall
Each sub-key stores the Display Name, UninstallString information for a program that you installed. Open Regedit.exe and navigate to the above key. Check if the "Uninstall" key is empty (contains no sub-keys). In that case, your best best is to rollback the system state using System Restore.
I know you've tried restore but it would perhaps help to pin point the problem
Joined: Jan 2012
Posts: 2,173
Likes: 0
From: .
Per Ardua ad Astraeus
Joined: Mar 2000
Posts: 18,575
Likes: 4
From: UK
HD - my 'add/remove' in XP has been very slow to load for ages - same 'symptoms' - torch - so slow I often think the machine is locked up. It may be you are not giving it enough time? Don't know why, but try making a cup of coffee next time and see if it is still 'locked'. There is always 'Revo' too.
Win7 on the other hand............................no time for coffee
Win7 on the other hand............................no time for coffee
Joined: Aug 2007
Posts: 647
Likes: 0
Slow loading
HD. I have had the same problem of slow loading for the last 5 months or so but without totally loosing any win XP components.
I'm beginning to wonder if you simply have a potential Hard Disk or RAM problem with the PC. If you do not already have a copy of memtest86 its worth downloading the iso file and burning it to a CD or Memory USB stick.
My Dell (Vostro) is five years old and still has its original HD - Its an obvious one but have you tried defragging the drive. I'm sure someone can suggest an appropriate disc checking utility for your PC
Best bet to copy all of your vital data to a second hard drive or memory stick. Have you tried Milo's link and how did it go ?
CAT III
I'm beginning to wonder if you simply have a potential Hard Disk or RAM problem with the PC. If you do not already have a copy of memtest86 its worth downloading the iso file and burning it to a CD or Memory USB stick.
My Dell (Vostro) is five years old and still has its original HD - Its an obvious one but have you tried defragging the drive. I'm sure someone can suggest an appropriate disc checking utility for your PC
Best bet to copy all of your vital data to a second hard drive or memory stick. Have you tried Milo's link and how did it go ?
CAT III
Thread Starter
Joined: Oct 2000
Posts: 8,266
Likes: 1
From: Berkshire, UK
Thanks friends. No joy so far but still trying..
PS.. Regarding leaving it for a while to populate. I left it for over an hour and, as usual, the PC ended up locked solid.
PS.. Regarding leaving it for a while to populate. I left it for over an hour and, as usual, the PC ended up locked solid.
Last edited by HEATHROW DIRECTOR; 12th April 2013 at 13:09.
Joined: Jan 2012
Posts: 2,173
Likes: 0
From: .
if that didn't fix it then its going to be hard. M$ recommend a repair installation!
Instead, as a workround I suggest you install CCleaner
One of the tools in there is a program add/remove utility which is actually quicker to load and run than Microsoft's program
CCleaner - PC Optimization and Cleaning - Free Download
That will easily do all you need
Instead, as a workround I suggest you install CCleaner
One of the tools in there is a program add/remove utility which is actually quicker to load and run than Microsoft's program
CCleaner - PC Optimization and Cleaning - Free Download
That will easily do all you need
Thread Starter
Joined: Oct 2000
Posts: 8,266
Likes: 1
From: Berkshire, UK
Milo.. Yes thanks, I have CC. It's just that I cannot stand toi have things not working properly. Today I did a system restore to some months ago when I know that Add/ Remove was working but it still does not work. Anyway, thanks for your help.
Thread Starter
Joined: Oct 2000
Posts: 8,266
Likes: 1
From: Berkshire, UK
Thanks again everyone. Problem appears to be solved although I am not 100% how or why. Yesterday I ran a system restore from many months ago. It took an extraordinary amount of time (like an hour) but when the PC eventually restarted it went through a sort of chkdsk routine on my second HD, which I never use. It locked after about 10 sectors and I rebooted. Same again. Soo.. today I cleaned that second drive thoroughly and now Add/Remove progs works fine. I can only assume that it was interrogating the second drive (F for some reason.
for some reason.
