Go Back  PPRuNe Forums > Misc. Forums > Computer/Internet Issues & Troubleshooting
Reload this Page >

Changing the amount of memory allocated to a logical drive

Wikiposts
Search

Notices
Computer/Internet Issues & Troubleshooting Anyone with questions about the terribly complex world of computers or the internet should try here. NOT FOR REPORTING ISSUES WITH PPRuNe FORUMS! Please use the subforum "PPRuNe Problems or Queries."

Changing the amount of memory allocated to a logical drive

Thread Tools
 
Search this Thread
 
Old 24th July 2010 | 09:06
  #1 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Aug 2006
Posts: 64
Likes: 0
From: Somerset
Changing the amount of memory allocated to a logical drive

Hi all,

I would be grateful for some advice, my computer disk has a logical drive ( I think thats the right expression) which is labelled D: Backup. There is nothing on it and its taking up 39GB of memory, meanwhile my C: drive is rapidly running out of space. Can anyone tell me how to allocate some of the spare D: drive space back into the C: drive. I have had the Computer management window up and gone into Disk Management but there doesn't seem to be a logical way of doing this task.
As ever all help gratefully recieved.
Wigglyamps
Wigglyamps is offline  
Reply
Old 24th July 2010 | 09:35
  #2 (permalink)  
 
Joined: Nov 2007
Posts: 456
Likes: 0
From: East Ecosse
Hmm, if it's a Dell/Acer D is indeed the backup OS and the 39 gb is hidden - although that sounds like quite a lot. Before you do anything go into control panel/folder options/view, and tick 'show hidden files and folders'. That will show what is using up all that space before you start deleting/moving things around...
mustpost is offline  
Reply
Old 24th July 2010 | 10:21
  #3 (permalink)  
 
Joined: Feb 2003
Posts: 144
Likes: 0
From: Scotland
One thing you could try is to reallocate the virtual memory paging file to the D: drive.

To find out how to do that go to the help and look for virtual memory.
cdtaylor_nats is offline  
Reply
Old 26th July 2010 | 22:20
  #4 (permalink)  
 
Joined: Aug 2002
Posts: 3,663
Likes: 0
From: Earth
which is labelled D: Backup.
How old is said computer ?

If relatively recent (to be taken generously, i.e purchased within last 5 years), then you'll probably find that the "D" drive is the manufacturers restore partition.

Mess with that at your peril unless they have provided you with restore CDs (or you have written AND TESTED some yourself).

Most manufacturers who use recovery partitions don't provide restore CDs.
mixture is offline  
Reply
Old 26th July 2010 | 23:41
  #5 (permalink)  

Official PPRuNe Chaplain
 
Joined: Apr 2001
Posts: 3,498
Likes: 0
From: Witnesham, Suffolk
... and most recovery partitions are no use whatever, anyway. If the hard drive dies, you can't get at Drive D any more than you can get at Drive C.

When I was in the process of buying a new computer, I stipulated that I wanted the installation software on a CD, not a partition. They provided a CD, all duly labelled as Microsoft Genuine, etc.

Years later, when I needed it, it turned out that the CD was a dud. By then, it didn't matter because I had another new PC with a genuine CD. I used the code on the label of the "dud CD" one.
Keef is offline  
Reply
Old 27th July 2010 | 19:48
  #6 (permalink)  
bnt
15 Anniversary
 
Joined: Feb 2007
Posts: 755
Likes: 26
From: Dublin, Ireland. (No, I just live here.)
There are programs out there that let you modify partitions, though it's been years since I've had to use one. I know of two such programs that offer free "home" versions: Partition Wizard and Partition Master.

There are significant risks involved if you use one of these programs, and I would strongly recommend taking a backup of all your data before you do. Basically, assume you're going to have to wipe the disk at some point, proceed as if you will, and enjoy the relief if you don't have to!
bnt is offline  
Reply
Old 27th July 2010 | 21:04
  #7 (permalink)  
 
Joined: Apr 2008
Posts: 565
Likes: 21
From: Passed away on Sept 6th
You might save yourself a lot of bovver if...

... your 'D' drive genuinely is empty, as you state in your post. You have by now ticked the 'show hidden' box, yes? And you have confirmed by clicking the 'properties' of the drive that it has nothing on it.

So, what has filled up your 'C' drive? If it's stuff like movies etc, it doesn't matter where you put them, provided you remember - and tell your viewer next time you want to look at 'em. Same applies to most other documents: photographs & the like which can take an awful lot of space over the years.

Copy the lot across, check they've copied cleanly, and then free up that space on 'C'.

Any good?
jimtherev is offline  
Reply
Old 27th July 2010 | 23:58
  #8 (permalink)  

Official PPRuNe Chaplain
 
Joined: Apr 2001
Posts: 3,498
Likes: 0
From: Witnesham, Suffolk
I just keep buying USB plugin drives and archiving stuff (and backing up) to those.

I have done some partition moving recently. Time was, Partition Magic was the only game in town, and I used it. Nowadays, there's EASEUS which is (was?) free and does an excellent job. Caution is needed - data can be lost as well as found blah blah.
Keef is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.