PCMCIA Cards
Thread Starter
PCMCIA Cards
Mrs SHJ has an older laptop with USB 1.1 ports and has been trying to connect a webcam with little success so far. The problem seems to be that most webcams are USB 2.0, even one or two that claimed to be 1.1. So.... someone suggested that we purchase a PCMCIA card with USB 2.0 ports on it and use that. Great! However, after reading articles on the web there are doubts as to whether these ports will support/power a webcam, although you'd think that it would.
And finally she has a mac, even though the sellers of said cards don't mention mac support (usually Windows 98 etc) would said card function as long as the cardbus was an industry standard ?
If anyone has any thoughts or had experiences with these PCMCIA cards i'd be be grateful to hear anything.
SHJ
And finally she has a mac, even though the sellers of said cards don't mention mac support (usually Windows 98 etc) would said card function as long as the cardbus was an industry standard ?
If anyone has any thoughts or had experiences with these PCMCIA cards i'd be be grateful to hear anything.
SHJ
Last edited by SpringHeeledJack; 9th Feb 2010 at 17:29.
Join Date: Apr 2002
Location: UK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
You can get PCMCIA / Cardbus USB adapters that are Mac compatible.
Whether they have enough power to drive a webcam is a different matter. Some have a connector for a plug-in external DC power source - not very portable, but that may not be a problem for you.
Example (not a recommendation): IOgear GPU202
Whether they have enough power to drive a webcam is a different matter. Some have a connector for a plug-in external DC power source - not very portable, but that may not be a problem for you.
Example (not a recommendation): IOgear GPU202
Join Date: Jan 2008
Location: The Land of Beer and Chocolate
Age: 56
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
A webcam is, realistically, a small power drain. IIRC, a USB port can handle 500mA and you would be amazed at what you can run under that.
To return to the original issue, I was under the impression that USB 2.0 was backwards compatible with other USB standards. I may be wrong, and will happily be corrected, but maybe the issue is nothing to do with USB 2.0
To return to the original issue, I was under the impression that USB 2.0 was backwards compatible with other USB standards. I may be wrong, and will happily be corrected, but maybe the issue is nothing to do with USB 2.0
Spoon PPRuNerist & Mad Inistrator
I was under the impression that USB 2.0 was backwards compatible with other USB standards.
Where I have seen this is where a USB1.1 port fails to provide sufficient power to a USB2 device (hard disk) - not a problem if you can add additional power via an external supply, or draw power from 2 USB sockets or even a PS/2 keyboard / mouse port.
SD
Join Date: Jun 1999
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I think that the problem referred to by the original poster is that if the USB interface is provided by an add-on card then any power supplied to the webcam will ultimately have to come via the PCMCIA interface. That could result in the available current being less than you would expect to be available from a motherboard USB port.
Hippopotomonstrosesquipidelian title
Join Date: Oct 2006
Location: is everything
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Many such cards support an external 5V power brick, and ship with it. I use this solution with one of my own notebooks, which seems to lie to the devices it's powering via its internal ports (USB devices can negotiate their power requirements).
Thread Starter
Thanks for the replies chaps!
That sums it up better than i could have! The laptop is great, but old and Mrs SHJ doesn't want to spend loads, as after a certain point it's easier to bite the bullet and go for a new steed. I wouldn't have thought that a webcam would draw too much current, but it seems as if this might be the case.
SHJ
I think that the problem referred to by the original poster is that if the USB interface is provided by an add-on card then any power supplied to the webcam will ultimately have to come via the PCMCIA interface. That could result in the available current being less than you would expect to be available from a motherboard USB port.
SHJ