VIRGIN BB dropping out.
Thread Starter
Join Date: Nov 2002
Location: ?
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
VIRGIN BB dropping out.
A question about wireless routers and virgin cable bb.
I've connected the inlaws tower to a router and wirelessly connected this to a laptop.
the tower keeps the connection with internet/ home network but the laptop will routinely drop the connection to the internet. however it stays connected to the home network.
anyone have a clue what is causing this??
ta
I've connected the inlaws tower to a router and wirelessly connected this to a laptop.
the tower keeps the connection with internet/ home network but the laptop will routinely drop the connection to the internet. however it stays connected to the home network.
anyone have a clue what is causing this??
ta
Join Date: Jun 2006
Location: BRISTOL!
Age: 39
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Join the club, keeps happening to my mother, and bugs the hell out of me when i am round their.
I called Virgin, they said a bunch of, well rubbish. Nothing solved as of yet...
However, i can add this to the equation, well for me...
PC = Always connected
LAPTOP With Dell Wifi (Broadcom i think) = Always connected
LAPTOP with intel = Drops frequently
Cant figure it out... I recon its an intel flaw with the router (DLINK)... Taking my Belkin round next week to see if this solves the issue
I called Virgin, they said a bunch of, well rubbish. Nothing solved as of yet...
However, i can add this to the equation, well for me...
PC = Always connected
LAPTOP With Dell Wifi (Broadcom i think) = Always connected
LAPTOP with intel = Drops frequently
Cant figure it out... I recon its an intel flaw with the router (DLINK)... Taking my Belkin round next week to see if this solves the issue
Thread Starter
Join Date: Nov 2002
Location: ?
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
interesting, that could be the problem.
can't remember what the router is it wasn't bought by me i just had to install it.
pls let me know how you get on.
ta muchly
can't remember what the router is it wasn't bought by me i just had to install it.
pls let me know how you get on.
ta muchly
Join Date: Jul 2002
Location: UK
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Had the same problem recently, but have solved it. In my case, it was down to the actual modem (which never did explain the whole desktop/laptop thing).
If the modem is the white 'Webstar' model, then try this link...
http://www.onemanblogs.co.uk/index.p...ar-cable-modem
Worked a treat for me but appreciate that it was a particular model issue in my case.
If the modem is the white 'Webstar' model, then try this link...
http://www.onemanblogs.co.uk/index.p...ar-cable-modem
Worked a treat for me but appreciate that it was a particular model issue in my case.
Join Date: May 2001
Location: England
Posts: 1,904
Likes: 0
Received 0 Likes
on
0 Posts
Having wireless encryption security enabled (WEP, WPA) can turn a reliable wireless router into a pile of junk. Every single router I've purchased over the last 5 years (4 of them) has had stability/performance issues with wireless encryption enabled.
I now don't bother with wireless encryption. Simply hide your SSID and use MAC filtering. This is unhackable to 99.99% of the population.
I now don't bother with wireless encryption. Simply hide your SSID and use MAC filtering. This is unhackable to 99.99% of the population.
Join Date: Jun 2006
Location: BRISTOL!
Age: 39
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Hey
I used a Belkin router, and all are working fine, no drop outs...
Tried to call DLINK, but they didnt care, and offered very little help...
I disabled Encryption, and all was fine...
I am going to try downloading the new firmware for the DLINK router to see if this solves the issues...
Guessing there is an incompatablity issues with DLINK and some Intel Cards, its an old wireless router, so firmware might be all it needs...
Or just replace it
I might try the trick from above, will keep security up. The range of my router is poor, they would have to be on the doorstep to get a signal, and the road is a fair distance up a drive, so i think scrapping encryption might be the best solution...
Are there any performance gains not using WPA/WEP?
I used a Belkin router, and all are working fine, no drop outs...
Tried to call DLINK, but they didnt care, and offered very little help...
I disabled Encryption, and all was fine...
I am going to try downloading the new firmware for the DLINK router to see if this solves the issues...
Guessing there is an incompatablity issues with DLINK and some Intel Cards, its an old wireless router, so firmware might be all it needs...
Or just replace it
I might try the trick from above, will keep security up. The range of my router is poor, they would have to be on the doorstep to get a signal, and the road is a fair distance up a drive, so i think scrapping encryption might be the best solution...
Are there any performance gains not using WPA/WEP?
Join Date: Jan 2008
Location: Over the hill and far away
Age: 76
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
tired-flyboy
You don't have some type of "Internet Security Suite" on the laptop, do you?
I had a similar problem with a Dell laptop and McAfee ISS - I could go anywhere on the home network, but nothing past the DSL modem. It took some messing with the setup of both McAfee and the router, but just as I was about to uninstall McAfee, it started working OK.
I had a similar problem with a Dell laptop and McAfee ISS - I could go anywhere on the home network, but nothing past the DSL modem. It took some messing with the setup of both McAfee and the router, but just as I was about to uninstall McAfee, it started working OK.
More bang for your buck
Join Date: Nov 2005
Location: land of the clanger
Age: 82
Posts: 3,512
Likes: 0
Received 0 Likes
on
0 Posts
I run a BT router with a very long WPA key and I have no problems whatsoever, nor did I when running a D-link one either.
I would look at the laptops power saving routines.
I would look at the laptops power saving routines.
Thread Starter
Join Date: Nov 2002
Location: ?
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
@Ken
There is a suite on but that is not the problem as the IP is in the firewall so the connection is getting through. The internet connection is the problem not the home network.
It seems that it is a Virgin BB/ router prob but as i won't be able to get my hands on the router till the weekend i'll not be able to do anything.
@granite
the laptop run Vista so what would/should the power settings be?
---
The annoying thing is, the router that was purchased was the one on the Virgin BB recommend list.
Thanks
There is a suite on but that is not the problem as the IP is in the firewall so the connection is getting through. The internet connection is the problem not the home network.
It seems that it is a Virgin BB/ router prob but as i won't be able to get my hands on the router till the weekend i'll not be able to do anything.
@granite
the laptop run Vista so what would/should the power settings be?
---
The annoying thing is, the router that was purchased was the one on the Virgin BB recommend list.
Thanks
More bang for your buck
Join Date: Nov 2005
Location: land of the clanger
Age: 82
Posts: 3,512
Likes: 0
Received 0 Likes
on
0 Posts
the laptop run Vista so what would/should the power settings be?
Back in the good old days of dial up connections, there used to be (IIRC) a setting that would drop the connection automatically in there was no activity for a set time period, no Idea if it's still active or not.
Join Date: Jan 2008
Location: Over the hill and far away
Age: 76
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Wasn't it the other way round? The connection would drop automatically after a pre-determined period of inactivity, making it necessary to send a "keep alive" burst of data every few minutes. (Also IIRC).
I think the time-out period was set by the ISP.
I think the time-out period was set by the ISP.