Starting a GV
Thread Starter
Join Date: Aug 2005
Location: Los Angeles
Age: 51
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Starting a GV
The "gods gift to aviation" guy (there is always one at the airport) reckons any piston pilot could figure out a GV in no time, without reference to a manual, get it started, and taxi out for takeoff. I'm of the opinion it would be bloody hard just to figure out how to get the door open and the stairs down, let alone start the main engines. Who's right? I do not think we will be able to find a Gulfstream owner willing to let us settle the bet, so I thought PPRUNE readers would enjoy this one.
Join Date: Aug 2006
Location: I can see it from here.
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
I know piston pilots who have difficulty starting their own aircraft, but, there are others who I think would be able to start most biz jets, its not rocket science. What happens after light off is another story.
Join Date: Jun 2007
Location: UK.
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Put it this way. A jet engine is simpler piece of equipment to operate than a piston engine because the principal of the jet engine is far simpler to understand and to operate. So starting a jet engine should (and is) easier than a piston engine.
ECON cruise, LR cruise...
Join Date: Apr 2002
Location: MIRSI hold - give or take...
Age: 52
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
...once you know how to open the door, get the power up & running and finding the right button to push & turn...
It is the "Any piston pilot"-bit that falsifies his statement - if he tries with "Some piston pilots..." he'll be heading in the right direction
It is the "Any piston pilot"-bit that falsifies his statement - if he tries with "Some piston pilots..." he'll be heading in the right direction
Shiny Side,
I am sure someone will try to tell you the answer, but be wary of the more sceptical PPruners who might think GII+GII=a free GV, on 1st April too.........
OCT 05 IN FLORIDA
Daniel Who Left on a Stolen Plane Arrested
A 22-year-old man who took five friends on a "joy ride" in a stolen private jet from St. Augustine, Florida to Buford, Georgia has been arrested and charged with reckless conduct and felony theft of a $7 million Cessna Citation 7.
Daniel Andrew Wolcott, described by Matt Drudge as "pimple faced," lives in Buford, Georgia, in Gwinnett County. The missing jet was found on Briscoe Field at the Gwinnett County Airport, after it was reported missing to Homeland Security.
Police spokesman Darren Moloney said the jetnapping "appears to be a joy ride."
Wolcott was arrested after investigators interviewed five people who were on the 10-seater during the flight. Additional federal charges are expected, although officials are not revealing exactly how Wolcott, who has a commercial flying license, obtained control of the plane.
It is not clear if the other passengers will face charges.
I am sure someone will try to tell you the answer, but be wary of the more sceptical PPruners who might think GII+GII=a free GV, on 1st April too.........
OCT 05 IN FLORIDA
Daniel Who Left on a Stolen Plane Arrested
A 22-year-old man who took five friends on a "joy ride" in a stolen private jet from St. Augustine, Florida to Buford, Georgia has been arrested and charged with reckless conduct and felony theft of a $7 million Cessna Citation 7.
Daniel Andrew Wolcott, described by Matt Drudge as "pimple faced," lives in Buford, Georgia, in Gwinnett County. The missing jet was found on Briscoe Field at the Gwinnett County Airport, after it was reported missing to Homeland Security.
Police spokesman Darren Moloney said the jetnapping "appears to be a joy ride."
Wolcott was arrested after investigators interviewed five people who were on the 10-seater during the flight. Additional federal charges are expected, although officials are not revealing exactly how Wolcott, who has a commercial flying license, obtained control of the plane.
It is not clear if the other passengers will face charges.
Join Date: Aug 2003
Location: With all the other nuts
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
After 30 seconds rigerous search, I found that Walcott was licenced to fly a Westwind
http://web.nbaa.org/public/news/20051014atl.php
I think Empty Cruise hit the nail on the head.
Chips
http://web.nbaa.org/public/news/20051014atl.php
Wolcott is a commercial pilot with multiengine and instrument ratings and reportedly is licensed to fly a Westwind corporate jet. But he's not rated to fly a Citation, a plane that usually requires two pilots.
Chips
Guest
Join Date: Apr 2003
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
...once you know how to open the door, get the power up & running and finding the right button to push & turn...
So yes, all easy when you know how
. Now as for a guy who has never seen it, putting him in the seat and asking him to do it without any kind of brief or prior knowledge, forget it.
Guest
Posts: n/a
As any fule no it's not just a case of getting the engines running. Not sure about the GV but on every type of jet I've ever flown IF you got the engines running (after starting the apu) it would be a very short taxi if you didn't also active one or more systems.
So no. Any piston pilot couldn't do it.
So no. Any piston pilot couldn't do it.
Join Date: Mar 2004
Location: schermoney and left front seat
Age: 57
Posts: 2,439
Received 0 Likes
on
0 Posts
"Put the other way around, I can think of a lot of bizjet pilots who wouldn't be able to start, say, a hot Lycoming IO-540."
Thats right. Piston Engines are a pain. It took ages for me to learn to start a hot D.H.104 Dove (D.H.Gypsies)...
Thats right. Piston Engines are a pain. It took ages for me to learn to start a hot D.H.104 Dove (D.H.Gypsies)...
Guest
Posts: n/a
At least the jet pilot has the advantage of probably had to start a hot piston donk somewhere in his past whereas the would-be jet pilot would probably sit mesmerised by all the pretty lights and switches. I know I was.
Come to think of it, I still am.
Come to think of it, I still am.
Join Date: May 2002
Location: Permanently lost
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
Recently had the opportunity to have a look at the cockpit of a Global Express and while the systems have been beautifully simplified this piston pilot would have had no chance of getting it started especially if it meant getting the APU up and running first.
Join Date: Mar 2004
Location: schermoney and left front seat
Age: 57
Posts: 2,439
Received 0 Likes
on
0 Posts
"probably sit mesmerised by all the pretty lights and switches. I know I was."
Flints, I was running out of switches and shiny lights on my model train - thats when I decided to be a pilot.
Flints, I was running out of switches and shiny lights on my model train - thats when I decided to be a pilot.
PPRuNe Handmaiden
IO 540s??
Oh they are a right pain to start when hot! If you didn't start them within 10min of shutting down (crew swap or quick dunny break). Forget it. Leave them for 30 min. I just used to swear at them until I found an eye pleasing lever position combination and some how it would start..
Dunno about the GV, but the Hawker's a doddle compared to the Islander (2 rotten bloody IO 540s)
Oh they are a right pain to start when hot! If you didn't start them within 10min of shutting down (crew swap or quick dunny break). Forget it. Leave them for 30 min. I just used to swear at them until I found an eye pleasing lever position combination and some how it would start..
Dunno about the GV, but the Hawker's a doddle compared to the Islander (2 rotten bloody IO 540s)
Join Date: Feb 2006
Location: Under the wing, asleep.
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Hot IO-540s, easy!
Throttle half
Start cranking
After 3-4 blades (3 bladed prop) start advancing mixture slowly.
When it kicks keep slowly advancing mixture and bring the throrrle back to around 1000rpm.
Works every time!
As for a GV.......... yeah, i'd have no hope!!!
Throttle half
Start cranking
After 3-4 blades (3 bladed prop) start advancing mixture slowly.
When it kicks keep slowly advancing mixture and bring the throrrle back to around 1000rpm.
Works every time!
As for a GV.......... yeah, i'd have no hope!!!
Guest
Join Date: Apr 2003
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
Just a SLF, but how hard can it be to find the engine start checklist and just press the buttons that are written there...
It will not tell you either how to start the APU, get it online or the sequence required for an engine start. It won't mention either how to get the thrust lever out of cut off and when.
Now if you want to go in the books rather than the check list then sure, you will find it all. Problem is to know where to look
and since we were talking just about jumping in and starting it, you will need some time to familiarise yourself with it.Not done in ten minutes.