PT6 Factory Installed Compressor Wash Ring

[Guptar]

Does anyone have a photos of this they they can post here. I'm after a photo for a class and I can't find one on the internet.

I do have plenty of photos of the hand held compressor wash ring, but that's not what I'm after.

[Dave Therhino]

This video shows it with decent views of it looking into the inlet plenum, and shows it spraying.

https://www.youtube.com/watch?v=mdf7n_CA5H0

You might be able to get a still shot you can use from the video.

[avionimc]

For the King Air B300 PT6A-60A:
Beechcraft Engine Wash Rings Kit 130-9003-xx (xx being a number specific to your aircraft serial number)
Aircraft: B300(350), B300C(350C)
KIT NO. 130-9003-xx

An alternate solution is the Tronair (blue) removable flexible hose ring.

You may also need the Turbine Wash Tube PWC32271.

For King Air, most important is the EXTENDED DRAIN KIT HBS/TPA 300EDM (one kit for both engines). This will avoid removing and re-installing the lower cowlings at every engine internal wash or rinse.

A good source is Kadex Aero Supplies in Canada.
https://cimg0.ibsrv.net/gimg/pprune.org-vbulletin/903x1319/tronair_removable_compressor_wash_hose_fb65e3314d1426ea5f1f6 a7ff87c0ce306ee9b8e.jpg


https://cimg6.ibsrv.net/gimg/pprune.org-vbulletin/226x223/pt6_beech_b300_engine_wash_rings_kit_130_9003_1acd61f741d43a f19fd5877d2784342b16b835d3.jpg
https://cimg8.ibsrv.net/gimg/pprune.org-vbulletin/1350x564/pwc32271_1fab1fb62c80f2f583c7175d9c2f4e429feda7ea.png