PT6 Factory Installed Compressor Wash Ring
Thread Starter
PT6 Factory Installed Compressor Wash Ring
Does anyone have a photos of this they they can post here. I'm after a photo for a class and I can't find one on the internet.
I do have plenty of photos of the hand held compressor wash ring, but that's not what I'm after.
I do have plenty of photos of the hand held compressor wash ring, but that's not what I'm after.
Join Date: Jun 2007
Location: SAYE
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
For the King Air B300 PT6A-60A:
Beechcraft Engine Wash Rings Kit 130-9003-xx (xx being a number specific to your aircraft serial number)
Aircraft: B300(350), B300C(350C)
KIT NO. 130-9003-xx
An alternate solution is the Tronair (blue) removable flexible hose ring.
You may also need the Turbine Wash Tube PWC32271.
For King Air, most important is the EXTENDED DRAIN KIT HBS/TPA 300EDM (one kit for both engines). This will avoid removing and re-installing the lower cowlings at every engine internal wash or rinse.
A good source is Kadex Aero Supplies in Canada.
Beechcraft Engine Wash Rings Kit 130-9003-xx (xx being a number specific to your aircraft serial number)
Aircraft: B300(350), B300C(350C)
KIT NO. 130-9003-xx
An alternate solution is the Tronair (blue) removable flexible hose ring.
You may also need the Turbine Wash Tube PWC32271.
For King Air, most important is the EXTENDED DRAIN KIT HBS/TPA 300EDM (one kit for both engines). This will avoid removing and re-installing the lower cowlings at every engine internal wash or rinse.
A good source is Kadex Aero Supplies in Canada.