View Full Version : Engineer to install new Radio & Intercom
Arclite01
27th Aug 2013, 14:44
Does anyone have a recommendation for an engineer to install my new radio and intercom ?
Ideally they should be based in East Anglia and you should have personal experience of their work !!
Thanks
Arc
Oldpilot55
27th Aug 2013, 16:23
If you can fly as far as Derby then I strongly recommend Airspeed Aviation. Give them a call.
Zulu Alpha
27th Aug 2013, 20:53
LAA or CAA?
E-Plane Ltd. at Fenland may be able to help you.
LightAircraft Maintence (http://www.fenland-flying-school.co.uk/light%20aircraft%20maintenance.htm)
We use them for our TB10
A and C
28th Aug 2013, 06:07
Without knowing what equipment you are installing and in what aircraft you are installing it recommendations are meaningless at worst and a guess at best.
Give the forum the data to work with and it will come up with good advice.
Arclite01
28th Aug 2013, 09:40
It's a Funkwerk ATR500 VHF Transceiver (with built in VOX intercom) - Panel Mount
It's an EASA C of A aeroplane (SF-28 Tandem Falke)
Based East Anglia - a trip to Derby is not a problem.
Thanks for the recommendations/info so far chaps..........
Arc
riverrock83
28th Aug 2013, 10:13
We got Airspeed to fit a Funkwerk ATR833 (which we supplied from elsewhere) with separate SPA400 Intercom, and removing lots of redundant equipment for our PtoF SA Bulldog. The Batt light keeps coming appearing on the ATR833 but we can't blame Airspeed for that (and we ignore it without problems).
They did a neat job (reduced basic aircraft weight by 16.5Kg) and blanked off the spaces left by the old equipment well.
No complaints (and we struggled to find anyone else to do the work).