Engineer to install new Radio & Intercom
Thread Starter
Join Date: Jan 2003
Location: Norfolk
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Engineer to install new Radio & Intercom
Does anyone have a recommendation for an engineer to install my new radio and intercom ?
Ideally they should be based in East Anglia and you should have personal experience of their work !!
Thanks
Arc
Ideally they should be based in East Anglia and you should have personal experience of their work !!
Thanks
Arc
Join Date: Dec 2010
Location: Sheffield
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: Jan 1999
Location: north of barlu
Posts: 6,207
Likes: 0
Received 0 Likes
on
0 Posts
Without knowing what equipment you are installing and in what aircraft you are installing it recommendations are meaningless at worst and a guess at best.
Give the forum the data to work with and it will come up with good advice.
Give the forum the data to work with and it will come up with good advice.
Thread Starter
Join Date: Jan 2003
Location: Norfolk
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
It's a Funkwerk ATR500 VHF Transceiver (with built in VOX intercom) - Panel Mount
It's an EASA C of A aeroplane (SF-28 Tandem Falke)
Based East Anglia - a trip to Derby is not a problem.
Thanks for the recommendations/info so far chaps..........
Arc
It's an EASA C of A aeroplane (SF-28 Tandem Falke)
Based East Anglia - a trip to Derby is not a problem.
Thanks for the recommendations/info so far chaps..........
Arc
Join Date: May 2011
Location: Glasgow
Age: 40
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
We got Airspeed to fit a Funkwerk ATR833 (which we supplied from elsewhere) with separate SPA400 Intercom, and removing lots of redundant equipment for our PtoF SA Bulldog. The Batt light keeps coming appearing on the ATR833 but we can't blame Airspeed for that (and we ignore it without problems).
They did a neat job (reduced basic aircraft weight by 16.5Kg) and blanked off the spaces left by the old equipment well.
No complaints (and we struggled to find anyone else to do the work).
They did a neat job (reduced basic aircraft weight by 16.5Kg) and blanked off the spaces left by the old equipment well.
No complaints (and we struggled to find anyone else to do the work).