PDA

View Full Version : Auxiliary Power Connector


x34gunner
15th Aug 2010, 11:19
Can anyone tell me where I can find a plug to fit this aux power socket in my bulldog?

Mark Fred Minary's Photos | Facebook (http://www.facebook.com/photo.php?pid=5215520&l=46e46bbd8f&id=660750754)

Thanks

Bushfiva
15th Aug 2010, 11:56
Nexus is owned by Amphenol. I know nothing about Bulldogs, but although it's got 28V aux power written on it, it looks astonishingly like a TJ-120 rear-mount jack or a variation thereof. IF that's the case, then the plug would be something along the lines of a TP-101/102/120.

But I really hope someone here has better info than me!

Gulfstreamaviator
15th Aug 2010, 12:09
This does look like the NATO Headset connection. Old UK PO connector also.

Could the ext power label be a red herring....

Is it possible to look behind the panel, to see the wiring on the socket.

Glf

x34gunner
15th Aug 2010, 12:23
Ok I admit I am blonde! They must be the original NATO connector sockets that have been 're-allocated' after the Dog was converted to civi use. Why I didn't twig I'll never know, been using NATO comms kit for years!

Gulfstreamaviator
15th Aug 2010, 13:50
Just what current load, will this socket support, are the contacts break before make, etc.

I am assuming a 28v lorry battery trickle charger, connected thru the socket.


glf

x34gunner
23rd Aug 2010, 20:47
I will be drawing about 250ma through it. It has a 2 amp CB inline.