Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Auxiliary Power Connector

Wikiposts
Search

Notices
Tech Log The very best in practical technical discussion on the web

Auxiliary Power Connector

Thread Tools
 
Search this Thread
 
Old 15th August 2010 | 11:19
  #1 (permalink)  
Thread Starter
 
Joined: Jan 2009
Posts: 20
Likes: 0
From: Buckinghamshire, UK
Auxiliary Power Connector

Can anyone tell me where I can find a plug to fit this aux power socket in my bulldog?

Mark Fred Minary's Photos | Facebook

Thanks
x34gunner is offline  
Reply
Old 15th August 2010 | 11:56
  #2 (permalink)  
Hippopotomonstrosesquipidelian title
 
Joined: Oct 2006
Posts: 1,825
Likes: 1
From: is everything
Nexus is owned by Amphenol. I know nothing about Bulldogs, but although it's got 28V aux power written on it, it looks astonishingly like a TJ-120 rear-mount jack or a variation thereof. IF that's the case, then the plug would be something along the lines of a TP-101/102/120.

But I really hope someone here has better info than me!
Bushfiva is offline  
Reply
Old 15th August 2010 | 12:09
  #3 (permalink)  
 
Joined: Sep 2006
Posts: 2,181
Likes: 1
From: any town as retired.
Audio and Mic Jack socket

This does look like the NATO Headset connection. Old UK PO connector also.

Could the ext power label be a red herring....

Is it possible to look behind the panel, to see the wiring on the socket.

Glf
Gulfstreamaviator is offline  
Reply
Old 15th August 2010 | 12:23
  #4 (permalink)  
Thread Starter
 
Joined: Jan 2009
Posts: 20
Likes: 0
From: Buckinghamshire, UK
Penny Dropped

Ok I admit I am blonde! They must be the original NATO connector sockets that have been 're-allocated' after the Dog was converted to civi use. Why I didn't twig I'll never know, been using NATO comms kit for years!
x34gunner is offline  
Reply
Old 15th August 2010 | 13:50
  #5 (permalink)  
 
Joined: Sep 2006
Posts: 2,181
Likes: 1
From: any town as retired.
next question

Just what current load, will this socket support, are the contacts break before make, etc.

I am assuming a 28v lorry battery trickle charger, connected thru the socket.


glf
Gulfstreamaviator is offline  
Reply
Old 23rd August 2010 | 20:47
  #6 (permalink)  
Thread Starter
 
Joined: Jan 2009
Posts: 20
Likes: 0
From: Buckinghamshire, UK
Current

I will be drawing about 250ma through it. It has a 2 amp CB inline.
x34gunner is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.