NPPL (M) Instructor.

[Rans Flyer]

Hi,

I have a NPPL (M) for 3 axis microlight, and would like to instruct.

I’m not sure what is required, and although I’ve been looking on the web but I can find a definitive answer. I’ve read that you need 100 hours P1 but that’s about it.


Thanks.

[BEagle]

You need to contact the BMAA who will be happy to advise you further.

[Genghis the Engineer]

Or ask your own instructor, since they'll have been through the system themselves.

G

[sucksqueezeBANGstop]

After gaining 100 + hours P1 on type you can apply to become an AFI which requires you fulfilling a course and passing the exams. My friend did his AFI course in Portugal, which took about 3 weeks, and cost approx 3k I think!! But don't quote me.

Then once sufficient hours acquired as AFI I believe you can take it to FI status. But, as says above - BMAA are best point of info! :)