PPRuNe Forums - View Single Post - Shut down engine after fire warning msg disappears ?
Old 4th Jan 2012, 16:15
  #37 (permalink)  
Flightmech
 
Join Date: Apr 2002
Location: EGSS
Posts: 943
Likes: 0
Received 0 Likes on 0 Posts
No delay here!

8.1.2
8.1.2 FIRE PROTECTION
B-777 Quick Reference Handbook

[] FIRE ENG L,R
Condition: Fire is detected in the engine

1 A/T ARM switch
(affected side) . . . . .Confirm . . . . . . . . . . . OFF
2 Thrust lever
(affected side) . . . . .Confirm . . . . . . . . . . . Idle
3 FUEL CONTROL switch
(affected side) . . . . .Confirm . . . . . . . . CUTOFF
4 Engine fire switch
(affected side) . . . . .Confirm . . . . . . . . . . . Pull
5 If the FIRE ENG message stays shown:
Engine fire switch . . . . . . . . Rotate to the stop
and hold for 1 second
If after 30 seconds, the FIRE ENG message stays
shown:
Engine fire switch. . . . . . . .Rotate to the
other stop and
hold for 1 second
6 APU selector
(if APU available) . . . . . . . . . . . .START, then ON
7 Transponder mode selector . . . . . . . . . . TA ONLY
8 Plan to land at the nearest suitable airport.
9 Do not accomplish the following checklist:

(Continues)
Flightmech is offline