PPRuNe Forums - View Single Post - Aussie Atpl Airlaw?
View Single Post
Old 26th Jul 2011, 09:59
  #12 (permalink)  
Damien1989
 
Join Date: Jan 2009
Location: Aus
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Minger,

Have just had a go at this practice exam and have a few differing answers.

Here are my interpretations.

1. 400nm
(aircraft is twin engine turbo-jet(turbine) and assuming it complies with 20.7.1B - a distance = to 120min at cruise speed or 400 miles which ever is less)

2.18 hours Refer CAO 48.1 para 3.10

4. no further requirements
The question is referring to co-pilot not PIC. Refer CAO 40.1.5 para 11.5, 11.6 & 11.7. all requirements are met for co-pilot.

5. The instrument must either be removed from the aeroplane or placarded as unserviceable
CAO 20.18 para 10.2 says u/s instruments under provisions of para 10.1 shall be prominently placarded u/s or removed from aircraft.

9. no further requirements
Aircraft for IFR only needs (CAO 20.18 4.1A - d. capability of operating the flight controls to maintain flight and manoeuvre the aeroplane about the roll and pitch axis e. an automatic heading capability f. altitude hold capability. All of which are covered with 2 axis operation?)

15.Yes, in CTA as well as in Class G airspace
you should always correct for wind in holding patterns
AIP ENR 1.5-21 3.2.1 e

Last edited by Damien1989; 28th Jul 2011 at 07:31.
Damien1989 is offline