PPRuNe Forums - View Single Post - maximum V1
Thread: maximum V1
View Single Post
Old 6th October 2010 | 19:22
  #11 (permalink)  
Keith.Williams.
 
Joined: Aug 2001
Posts: 775
Likes: 0
From: Dorset
And V1 must not be less than the minimum speed at which we can recognize a critical engine failure, decide to go, and complete the take-off safely, with the critical engine inoperative, reaching V2 and screen height within the remaining TODA.

With a high take-off mass and a short TODA, this requirement may limit V1min, before it becomes low enough for V1<=VMCG to become the problem.
Keith.Williams. is offline  
Reply