There seems to be symmetric reverse from the forward video.... and lots of it. If that was a P2F cadet landing then the trainer should not have let the aircraft stray so far towards the slush on the runway margin, as the result was entirely predictable
I once had an autobrake mishap on landing with autobrake low + idle planned. Clean dry runway... As the nosewheel touched down there was a sharp grab of one brake snatching and immediately releasing. This was followed by a BSCU 2 ECAM and the autobrake dropping out. The runway was nice and long and there was no upset to directional control. Rev Idle was held to 70kts where we tried the brakes which worked fine, as did the NWS. On inspection there was a flat spot on one of the tyres so draw your own conclusions about what happened. Playing back the QAR gave no indication of fault, neither did the FDR. Engineers changed both BSCUs as a precaution. I think the Airbus logic may have prevented a double main-tyre blowout that day, and possible runway excursion.