A330 cab pr excess residual pr
After land and shut down the both engine. A red ECAM triggered. Which is CAB PR EXCESS RESIDUAL PR. but we checked all the out flow door are opening and ^p is zero. Do someone knows why? |
This is normally can be happened about 12 secs after All Engs shutdown just followed ECAM
Pack 1 & 2 Off and wait. CC will not open the cabin's door since the red door light will be flashing ! RPCU use the sensor different from those display on ECAM SD page. Ecam actions and wait before advise CC to "disarmed." |
What if you have the cockpit window fully open when the ECAM is triggered? The pressure in and out of the cabin is supposed to be already equalized with the window open...
Thanks! |
Normally draining the water lines of the sensor sorts it.
|
What was the elevation of the airport concerned ? I had it on an A320 at a 7000' airport, same situation with the outflow doors and cabin pressure. We switched the packs off as per ECAM and it went away shortly afterwards.
|
All times are GMT. The time now is 00:24. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.