pt62-42 engine vibration
hi all,
brief discribtion of the maintenance done 1. prop overhaul 2. overspeed and prop gov change question: why the left engine is vibrating more that previously in feather condition and can be felt in cabin and cockpit. right engine is running fine. it can be seen from outside that spinner is not rotating in liner motion. |
A few questions:
1) does this "vibration" disappear once the prop is moved out of feather 2) were the props balanced once they were reinstalled 3) what is the prop rpm while in feather and the engine operating at ground idle 4) what airframe installation are we talking about With regards to the spinner not rotating in linear motion...there is a maintenance procedure to properly position the spinner that normally rectifies that. |
Originally Posted by 604guy
(Post 8107124)
A few questions:
1) does this "vibration" disappear once the prop is moved out of feather 2) were the props balanced once they were reinstalled 3) what is the prop rpm while in feather and the engine operating at ground idle 4) what airframe installation are we talking about With regards to the spinner not rotating in linear motion...there is a maintenance procedure to properly position the spinner that normally rectifies that. |
hello.
sorry for the late responce 1. yes it disappears when prop move to fine position 2.yes the prop were balanced before installation 3. in feather its about 500 rpm and in ground idle its 1200 4.checked the installation of spinner and is totally fine. |
All times are GMT. The time now is 15:10. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.