Ths trim setting airbus
 

hi guys,

A320,

Where can I get the THS trim setting ie (.XXUP, DN) from other than the load and trim sheet, i tried to look in fcoms but i found nothing any idea ?

thanks

Could you refine your question?

Is it the trim setting displayed you're looking for, I.e. from the FLT CTL page, or where you can find other means of calculating CG?

Flex

If you mean other than on the trim wheel: A320 Weight & Balance Manual 1.00.09 p1 :ok:

Keep it in the green :E

ECAM FCTL page

sorry guys,

I mean calculating the trim setting.. for the PERF page entry in MCDU..

where can i get that from thanks!!

In the thrust lever and in the checklist you have the scale with CGs and THS setting.
Is that what you mean?

Or you want a load index to %MAC CG table?

affirm im looking for table shows the trim%
for example 34.5 = 1.2DN .. I need the a table or the way to get the second information. 1.2DN

a source other than the Airbus trim and Load Sheet coz we dont use it in our company and the figure on the trim wheel..

I'm affraid that I don't really understand exactly what you need.

There is a relationship between the take off CG and the take off pitch trim setting. This relationship is constant for a given airplane (there can be differences between models). This relationship is given in the THS wheel itself and in the normal checklist. It is also shown in the balance part of the load sheet.

If your airplane does not use the checklist, nor the THS scale, then they must have manual load and balance sheet. If that is not what you are looking for, there is nothing else I can do...

in our airline, its in the qrh, on the back cover under the normal checklist

a source other than the Airbus trim and Load Sheet coz we dont use it in our company and the figure on the trim wheel..

I say again: A320 Weight & Balance Manual 1.00.09 p1 :cool:

We used to have it too, but not anymore!

Quote:

---

I say again: A320 Weight & Balance Manual 1.00.09 p1

---

Its exactly what I am looking for but what is there is not for all aircrafts registerations! and unfortunetly the document is not approved by our company..

im wondering if its somewhere in fcoms!!

Any way thank you very much guys so kind of you:ok:

What do you use when there is no computer load sheet available?
Don't you have load and balance sheets? There you can find it