Ths trim setting airbus
Thread Starter
Join Date: Jun 2006
Location: Middle East
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Ths trim setting airbus
hi guys,
A320,
Where can I get the THS trim setting ie (.XXUP, DN) from other than the load and trim sheet, i tried to look in fcoms but i found nothing any idea ?
thanks
A320,
Where can I get the THS trim setting ie (.XXUP, DN) from other than the load and trim sheet, i tried to look in fcoms but i found nothing any idea ?
thanks
Join Date: Jun 2002
Location: Vega Constellation
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Could you refine your question?
Is it the trim setting displayed you're looking for, I.e. from the FLT CTL page, or where you can find other means of calculating CG?
Flex
Is it the trim setting displayed you're looking for, I.e. from the FLT CTL page, or where you can find other means of calculating CG?
Flex
Thread Starter
Join Date: Jun 2006
Location: Middle East
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
affirm im looking for table shows the trim%
for example 34.5 = 1.2DN .. I need the a table or the way to get the second information. 1.2DN
a source other than the Airbus trim and Load Sheet coz we dont use it in our company and the figure on the trim wheel..
for example 34.5 = 1.2DN .. I need the a table or the way to get the second information. 1.2DN
a source other than the Airbus trim and Load Sheet coz we dont use it in our company and the figure on the trim wheel..
Join Date: Mar 2005
Location: Uh... Where was I?
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
I'm affraid that I don't really understand exactly what you need.
There is a relationship between the take off CG and the take off pitch trim setting. This relationship is constant for a given airplane (there can be differences between models). This relationship is given in the THS wheel itself and in the normal checklist. It is also shown in the balance part of the load sheet.
If your airplane does not use the checklist, nor the THS scale, then they must have manual load and balance sheet. If that is not what you are looking for, there is nothing else I can do...
There is a relationship between the take off CG and the take off pitch trim setting. This relationship is constant for a given airplane (there can be differences between models). This relationship is given in the THS wheel itself and in the normal checklist. It is also shown in the balance part of the load sheet.
If your airplane does not use the checklist, nor the THS scale, then they must have manual load and balance sheet. If that is not what you are looking for, there is nothing else I can do...
Join Date: Mar 2009
Location: pre-dep area
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
a source other than the Airbus trim and Load Sheet coz we dont use it in our company and the figure on the trim wheel..
I say again: A320 Weight & Balance Manual 1.00.09 p1
I say again: A320 Weight & Balance Manual 1.00.09 p1
Thread Starter
Join Date: Jun 2006
Location: Middle East
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
in our airline, its in the qrh, on the back cover under the normal checklist
I say again: A320 Weight & Balance Manual 1.00.09 p1
im wondering if its somewhere in fcoms!!
Any way thank you very much guys so kind of you