Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

3 VERY EASY questions HYD system 737 classic

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

3 VERY EASY questions HYD system 737 classic

Thread Tools
 
Search this Thread
 
Old 14th Aug 2003, 20:04
  #1 (permalink)  
Thread Starter
 
Join Date: Aug 2003
Location: North of Africa
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Lightbulb 3 VERY EASY questions HYD system 737 classic

Hi all! I'd like to ask 3 questions about the hydraulis system:

1] The "B" tank is damaged and has lost all of its fluid.
The FLT CONTROL switch is positioned to STBY RUD.
The using units return the STBY fluid to the "B" reservoir, but
this fluid goes lost.
The consequence could be the total loss of STBY fluid in case
of extensive usage.
Is it for this reason that the Leading Edga Devices can be
extended but not retracted by the STBY system?


2] Despatch with Antiskid inoperative.
Is it necessary to manually brake in order to stop the wheels
from spinning before raising the gear?


3] Total loss of system "A" fluid after lift off, but with no engine
failure.
Since the NOSE WHEEL STEERING switch (as installed) acts on
the Landing Gear Transfer Valve, would it be possible to use
it in order to raise the gear with system "B" pressure?

Thanks a lot, Gentlemen, for your inputs.

Regards
W.Shirra
W.SHIRRA is offline  
Old 14th Aug 2003, 20:19
  #2 (permalink)  
 
Join Date: Sep 1999
Posts: 541
Likes: 0
Received 0 Likes on 0 Posts
1)About 1 US gallon is saved for PTU operation(autoslats) and that is all.Nothing to do with Stby sys.

2)NO

3)NO
Rananim is offline  
Old 14th Aug 2003, 23:26
  #3 (permalink)  
 
Join Date: May 2002
Location: USA
Age: 73
Posts: 132
Likes: 0
Received 0 Likes on 0 Posts
Here's a very simple answer to your #1

http://www.b737.org.uk/hydraulics.htm

The using units return the fluid to the resivoir from whence it came. B to B and Standby to Standby. (Okay spoilers, brakes, reversers are exceptions - quit hollering, I'm simplifying)
The standby resivoir is serviced by the B system resivoir at the 72% level but it is a stand-alone system when used and the fluid doesn' t intermingle with the other systems. (Please see parenthetical statement above)
The leading edge devices, when actuated by the standby system are a relatively low drag device without the penalties in speed that the trailing edge flaps cause. If they are extended by the standby system you're looking for a place to land because things have really gotten bad. You won't be needing to retract them in the near future.
avioniker is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.