Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

737 Questions

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

737 Questions

Thread Tools
 
Search this Thread
 
Old 5th Sep 2001, 16:25
  #1 (permalink)  
Thread Starter
 
Join Date: Sep 2000
Location: UK
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Post 737 Questions

1.Why does rudder pressure in 737 go to high when there is a depressurisation in B Hyd sys? The manual doesn't mention A Hyd sys??

2.In the QRH there is a speedbrakes extended light checklist as well as the other speedbrake checklists, but, silly me, I cant find the light anywhere??
Pete the Pilot is offline  
Old 5th Sep 2001, 22:32
  #2 (permalink)  
 
Join Date: Dec 2000
Location: very close to STN!!
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Cool

you must not be talking about the -300 or -400's.

my QRH only shows SPEED BRAKE DO NOT ARM checklist and that light is on the forward panel just above the fuel guages.

i also do not know of the rudder pressure change.
stator vane is offline  
Old 6th Sep 2001, 01:54
  #3 (permalink)  
Moderator
 
Join Date: Apr 2001
Location: various places .....
Posts: 7,187
Received 97 Likes on 65 Posts
Post

Following on from the previous response ..

(a) perhaps you could recheck the title of the light in question ?

(b) you might be thinking of the situation with loss of A and B if the relevant Flight
Control Switches are not positioned to Standby Rudder. Then the loads get quite high and the rudder is near locked out as far as I can tell.

(c) which model are you concerned with ?
john_tullamarine is offline  
Old 6th Sep 2001, 12:31
  #4 (permalink)  
 
Join Date: Jan 1999
Location: north of barlu
Posts: 6,207
Likes: 0
Received 0 Likes on 0 Posts
Post

Pete i think that you will only find the speed brakes extended light on the 6-7-800 aircraft (900 ?) it is on in flight when the the speed brake lever is beyond the armed position AND te flaps extended more than 10, or rad alt less than 800ft.

On the ground if the speed brake lever is in the down position and the ground spoilers are deployed.

[ 06 September 2001: Message edited by: A and C ]
A and C is offline  
Old 6th Sep 2001, 12:36
  #5 (permalink)  
 
Join Date: Dec 2000
Location: very close to STN!!
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Cool

ah-ha!

so he must be speaking the B737-Mutant Generation!!!!!!!!
stator vane is offline  
Old 6th Sep 2001, 16:38
  #6 (permalink)  
Thread Starter
 
Join Date: Sep 2000
Location: UK
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Post

Sorry guys, its the -300 series.

I definitely have 'speedbrakes extended' checklist as well as 'speed brake do not arm'.

Rudder going to high pressure is referenced in Vol 2 flight controls (page 9.20.10 ).
Staes hydraulic pressure returns to normal when descending thru 700' when N1 difference between left and right exceeds 45% and if B hydraulic sys depressurises. Can't see the logic of JUST B depressurising............
Pete the Pilot is offline  
Old 6th Sep 2001, 18:46
  #7 (permalink)  
CaptainSandL
Guest
 
Posts: n/a
Post

Pete,

Since the rudder scares, 737’s are now fitted with an RPR (Rudder Pressure Reducer) to reduce the rudder authority by about 30%. It is clever enough to give you back full rudder pressure at certain critical times ie:

a) During take-off below 1000’ Rad.alt.
b) During approach below 700’ Rad.alt.
c) If a difference of >45% N1 exists between power units.
d) If B-system hydraulic pressure is lost.

Unfortunately it cannot give you back full rudder pressure if system-A is lost because it is powered by system A!

A good article on the 737 rudder system can be found at:
www.b737.org.uk\theruddersystem.htm

S & L
 
Old 7th Sep 2001, 03:30
  #8 (permalink)  
 
Join Date: Dec 2000
Location: very close to STN!!
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Question

wow, when i wrote my reply, i had my book beside the laptop!!

my airline has not made a peep about this new hydraulic thing. i knew we had reducers, only by reading the tech logs but no text about what it really does.

and the speedbrake also??!!

can i ask which airline gave you that info, or if not was it UK, USA or otherwise??

will talk to my company tomorrow!!

thanks for the info
stator vane is offline  
Old 7th Sep 2001, 15:23
  #9 (permalink)  
Thread Starter
 
Join Date: Sep 2000
Location: UK
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Post

Thanks Captsandl, I didn't know the system was powered by A so that would explain why B is the only one 'backed up'.
Pete the Pilot is offline  
Old 7th Sep 2001, 20:05
  #10 (permalink)  
CaptainSandL
Guest
 
Posts: n/a
Post

Stator,
I am with a UK operator of classics, but the info is not likely to appear our pilots tech manuals – need to know basis and all that.

Pete,
You appear to be in a minority with your “Speedbrakes Extended” light and checklist. Could you post it here for the rest of us with any accompanying notes?

S & L
 
Old 10th Sep 2001, 16:38
  #11 (permalink)  
Thread Starter
 
Join Date: Sep 2000
Location: UK
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Post

I've got the Checklist but unfortunately can't find the light!

Checklist:

Speedbrakes Extended.

Condition: The speedbrakes extended light indicates:

*In flight, the speed brake is beyond the armed position with either the trailing edge flaps extended more than flaps 10 or rad alt less then 800'

*On ground the speed brake lever in down detent and the ground spoilers are not stowed.

Speed Brake Lever..........Armed/down detent

If light illuminated on the ground:

Do not take-off.
Pete the Pilot is offline  
Old 10th Sep 2001, 23:32
  #12 (permalink)  
CaptainSandL
Guest
 
Posts: n/a
Question

Pete

I have never seen this light before on any classic and our maintenance training manual makes no reference to it. Maybe it was installed on –200’s and migrated across if your airline, or the previous owners, operated both types. My guess is it shouldn’t be in your QRH. What do your engineers / fleet managers say? I presume you still have the SPEED BRAKE DO NOT ARM and SPEED BRAKE ARMED lights and this doesn’t replace either of those. Let us know what you find out.

S & L
 
Old 11th Sep 2001, 09:53
  #13 (permalink)  
 
Join Date: Apr 2000
Location: USA
Posts: 196
Likes: 0
Received 0 Likes on 0 Posts
Post

I have seen the lite as an option on several "used" aircraft. The light is on when the brakes are out and the speed brake is in use past the arm detent. We quickly deactivated the system for standardization of the fleet. I have also seen the "blow up" light on a few examples that tells you when the falpas blow up to 30 when you pass 156 KIAS with 40 selected.
Ugly Jet Captain is offline  
Old 15th Sep 2001, 09:01
  #14 (permalink)  
 
Join Date: Feb 2000
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Post

We have the speedbrake (extended)light on our a/c(B737-300/400/500).It is located above the accumulator brake pressure indicator on the F/O's panel.
It flashes when in air & the speedbrake lever is aft of the ARMED position & flaps extended beyond position 10.
Cheers!
steelbird is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.