146 T/O Flap
Thread Starter
Join Date: Jul 2001
Location: Over there.
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
146 T/O Flap
Can any 146 drivers let me know what thier usual flap settings for T/O are. We use Flap 24 for standard runways and Flap 30 in LCY. It appears that other operators use othe settings. How do you find a standard Flap 18 T/O compared to 24, especially on initial climb performance?
Join Date: Aug 2000
Location: Geneva
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Hi INLAK !
I'm on the "newer" RJ stuff, but this is what we basically have.
Usual flap setting is 18. This, most of the times, gives us (?) a better coverage of the 2nd segment which is mostly limiting. In some place, such as the infamous ZRH northely SIDs, you have to use 18 for noise abattement. Strange enough, we are some times better using flaps 24 and sometimes better with 18 using the same runway and conditions, but don't ask me, I sure didn't write that perfbook (called ODM in our company). Seems it should be based on the BAe WOT tables, but is sure doesn't make sense, at least not all the time
Nevertheless, another rule, if not overriden by another one (see everybody, this is why aviation as whole is sooo complicated.... ) is that when heavier than 37T, flap setting is 24. Now, slippery rwys, ice etc, will have to be dealt with fl30.
As for LCY/LUG/SIR and similar places, we can use up to 33.
Initial climb perf? Yeah, well, like in LCY with 33 it is just a matter to be jumped airborne and then retract the dangling stuff. Fl24 gives you better initial obstacle clearance, but once more penalizes you later.
All this of course based on my modest experience of this pleasant little bird
I'm on the "newer" RJ stuff, but this is what we basically have.
Usual flap setting is 18. This, most of the times, gives us (?) a better coverage of the 2nd segment which is mostly limiting. In some place, such as the infamous ZRH northely SIDs, you have to use 18 for noise abattement. Strange enough, we are some times better using flaps 24 and sometimes better with 18 using the same runway and conditions, but don't ask me, I sure didn't write that perfbook (called ODM in our company). Seems it should be based on the BAe WOT tables, but is sure doesn't make sense, at least not all the time
Nevertheless, another rule, if not overriden by another one (see everybody, this is why aviation as whole is sooo complicated.... ) is that when heavier than 37T, flap setting is 24. Now, slippery rwys, ice etc, will have to be dealt with fl30.
As for LCY/LUG/SIR and similar places, we can use up to 33.
Initial climb perf? Yeah, well, like in LCY with 33 it is just a matter to be jumped airborne and then retract the dangling stuff. Fl24 gives you better initial obstacle clearance, but once more penalizes you later.
All this of course based on my modest experience of this pleasant little bird
Join Date: Jun 1999
Location: UK
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
In general the higher the flap setting the quicker you get off the rwy but the worse your climb performance.
Hence flap 18 will give the highest t/o speed but the best climb performance whereas flap 30 will get you off the rwy quicker but will impare your climb schedule. So short field t/o will require a higher flap setting.
We have no performance for a flap 33 t/o hence we can't use it. However we are shortly going to be approved for flapless take offs (on ferry flights only)
As for Co SOP's we are free to use whatever setting we see appropriate, except for the obvious senarios
Noise sensitive t/o = flap 18
Contaminated rwy = flap 30.
As for LCY we usually use flap 24 however if your heavy then flap 30. Although with a 100 series flap 18 works very nicely.
[ 18 July 2001: Message edited by: notac ]
Hence flap 18 will give the highest t/o speed but the best climb performance whereas flap 30 will get you off the rwy quicker but will impare your climb schedule. So short field t/o will require a higher flap setting.
We have no performance for a flap 33 t/o hence we can't use it. However we are shortly going to be approved for flapless take offs (on ferry flights only)
As for Co SOP's we are free to use whatever setting we see appropriate, except for the obvious senarios
Noise sensitive t/o = flap 18
Contaminated rwy = flap 30.
As for LCY we usually use flap 24 however if your heavy then flap 30. Although with a 100 series flap 18 works very nicely.
[ 18 July 2001: Message edited by: notac ]
Join Date: Jun 2001
Location: Taiwan
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Why ever would you want to take off with Flap 0? What is your tire speed limit? It would create a very high demanding V1 abort. We operate with low speed tires. Often F18 is restricted due tire speed limits.
Join Date: Aug 2000
Location: Geneva
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Ballooning when going fl18? Sure it does. And so it does fl18 to 24. I guess after a few hundred hours you don't feel it that much anymore, unless you're on a raw data (approach ).
IBTheseus , what kind of speed tire are you talking about? Ours (RJ) is 210MPH on the mains and 190 on the nose if memory serves me right. Even when taking off ZRH (noise abate) at 46T in the RJ100, our Vr is at 141kts (162 MPH) and V2 147 kts (169 MPH).
IBTheseus , what kind of speed tire are you talking about? Ours (RJ) is 210MPH on the mains and 190 on the nose if memory serves me right. Even when taking off ZRH (noise abate) at 46T in the RJ100, our Vr is at 141kts (162 MPH) and V2 147 kts (169 MPH).
Thread Starter
Join Date: Jul 2001
Location: Over there.
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
I was flying one of ours a few weeks ago, took out F18, autopilot still in, and it gained 300ft!!
We are also limited to a MTOW of 41750kgs due to "economical reasons", which can cause problems on longer flights, though it does help with the perf!
We are also limited to a MTOW of 41750kgs due to "economical reasons", which can cause problems on longer flights, though it does help with the perf!
Join Date: Jun 1999
Location: UK
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Why have a procedure for a flapless take off? The only reason would be if the a/c had a flap problem away from base with no engineering cover. It would be a way of recovering the a/c without having to pay for third party engineering.
As I said this procedure will only be allowed on a ferry flight and with specific written permission from the boss.
As I said this procedure will only be allowed on a ferry flight and with specific written permission from the boss.