Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Arrow alt and gear

Wikiposts
Search

Notices
Tech Log The very best in practical technical discussion on the web

Arrow alt and gear

Thread Tools
 
Search this Thread
 
Old 9th March 2025 | 14:59
  #1 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Apr 2008
Posts: 90
Likes: 3
From: Edinburgh
Arrow alt and gear

Arrow alternator trip on gear up
Maintenance baffled

Last edited by atceng; 9th March 2025 at 15:01. Reason: Add info
atceng is offline  
Reply
Old 9th March 2025 | 15:34
  #2 (permalink)  
15 Anniversary
 
Joined: Apr 2008
Aviation Qualifications: ATPL
Posts: 1,121
Likes: 182
From: cowtown
Facilitation around the moving parts of the switches ? , dry lube , mud ,grass , gravel , ice , on the stop switch . If whatever was keeping the up switch from indicating up is no longer there . Foreign object substance lost when the gear was dropped again ?
Sign at my old AMO shop :
Answers $50
Correct answers $100
Dumb looks are still free
fitliker is offline  
Reply
Old 11th March 2025 | 22:26
  #3 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Apr 2008
Posts: 90
Likes: 3
From: Edinburgh
Could it be the regulator failing to reduce the alternator field when the pump load was stopped, the transiant rise in voltage tripping the over volt system.
But what has caused this to manifest after years of correct operation?
atceng is offline  
Reply
Old 11th March 2025 | 23:59
  #4 (permalink)  
 
Joined: Jan 2015
Posts: 453
Likes: 467
From: Jupiter
I don't have any aircraft specific knowledge but issues related to the stoppage/turning off of an electric motor are generally associated with the failure of the 'freewheel diode' that's part of the motor (or motor drive, in larger installations) and is there to stop transient overvoltage spikes by allowing the collapsing magnetic field to dissipate the electrical energy it generates into a loop rather than slamming up against an open circuit. (It's there to prevent the electrical version of water hammer.)

Googling that term (freewheel diode) and a bit of looking at the wiring diagram might help you out. Diodes can be tested with a multimeter. It may be part of the motor assembly or inside the motor.

Failing that, yes, voltage regulator failure, they do get old and fail...
Lascaille is offline  
Reply
Old 12th March 2025 | 11:23
  #5 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Apr 2008
Posts: 90
Likes: 3
From: Edinburgh
Thanks for your comments, solenoids in aircraft often have diodes fitted but I havent seen it on motors, if a regulator change doesnt cure we'll try a beefy diode.
My regulator may also be faulty cos I'm feeling old and frail, or was that fail?
atceng is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.