Final Approach Track Offset CDFA
Thread Starter
Join Date: Mar 2013
Location: 36,000'
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Final Approach Track Offset CDFA
With reference to the following
Approach with a nominal vertical profile using the CDFA technique:
(a) The optimum angle for the approach slope is 3 degrees, and the gradient should preferably not exceed 6.5 percent which equates to a slope of 3.77 degrees, (400 ft/NM) for procedures intended for conventional aeroplane types / class and / or operations. In any case, conventional approaches should be limited to 4.5 degrees for Category A and B aeroplanes and 3.77 degrees for Category C and D aeroplanes, which are the upper limits for applying CDFA technique. A 4.5 degree approach slope is the upper limit for certification of conventional aeroplanes.
(b) The approach should meet at least the following facility requirements and associated conditions. NDB, NDB/DME, VOR, VOR/DME, LLZ, LLZ/DME, VDF, SRA, RNAV(LNAV) with a procedure which fulfils the following criteria:
(i) The final approach track off-set ≤ 5degrees except for Category A and B aeroplanes, where the approach-track off-set is ≤ 15 degrees;
Some CDFA approaches are more then 10 degrees offset from the runway. So how are they valid.
EASA Doc
Approach with a nominal vertical profile using the CDFA technique:
(a) The optimum angle for the approach slope is 3 degrees, and the gradient should preferably not exceed 6.5 percent which equates to a slope of 3.77 degrees, (400 ft/NM) for procedures intended for conventional aeroplane types / class and / or operations. In any case, conventional approaches should be limited to 4.5 degrees for Category A and B aeroplanes and 3.77 degrees for Category C and D aeroplanes, which are the upper limits for applying CDFA technique. A 4.5 degree approach slope is the upper limit for certification of conventional aeroplanes.
(b) The approach should meet at least the following facility requirements and associated conditions. NDB, NDB/DME, VOR, VOR/DME, LLZ, LLZ/DME, VDF, SRA, RNAV(LNAV) with a procedure which fulfils the following criteria:
(i) The final approach track off-set ≤ 5degrees except for Category A and B aeroplanes, where the approach-track off-set is ≤ 15 degrees;
Some CDFA approaches are more then 10 degrees offset from the runway. So how are they valid.
EASA Doc
