Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

737 low pack 20psig

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

737 low pack 20psig

Thread Tools
 
Search this Thread
 
Old 14th Feb 2023, 02:25
  #1 (permalink)  
Thread Starter
 
Join Date: Feb 2023
Location: Virginia
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
737 low pack 20psig

I'm currently troubleshooting this gripe and Im not sure what I'm coming up with, fault iso list: down to turning apu bleed on and turning the prsov valve to open and check for leaks when I do it to the right engine I hear the high stage valve really loud(the side that's low) but I do the same step on the left engine and the high stage is much quieter. The "split" happens at climb and sat at cruise. Looking at the diagram I'm seeing 5th stage takes over but could the high stage valve be faulty that would cause the low pressure to go through the prsov?
Johnnygoodguy is offline  
Old 14th Feb 2023, 13:10
  #2 (permalink)  
 
Join Date: Sep 2001
Location: Blighty
Posts: 788
Received 87 Likes on 22 Posts
What does the FIM say?
HOVIS is offline  
Old 18th Feb 2023, 10:20
  #3 (permalink)  
 
Join Date: Oct 2013
Location: McHales Island
Age: 68
Posts: 180
Likes: 0
Received 1 Like on 1 Post
Johnnygoodguy,

Check the sense/muscle lines just above the PRSOV. They are prone to cracking around the welds on the lines in that area.

Rgds McHale.
Capt Quentin McHale is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.