RNP approach & codes

[dc9-32]

Not sure if anyone here can assist but the company aircraft has been approved for LNAV/VNAV approaches and I can see the PBN codes to use are S1 and S2.

However, Eurocontrol does not validate the codes as follows:

(FPL-ABCDE-IG
-B737/M-SFDGHIJ1J4J5RWXYE1E2E3M1/LB1V1D1
-EGSS0900
-N0462F370 NUGBO M183 SILVA Q41 SAM M195 LORKU UN866 KORUL DCT AGADO
DCT ORTIS
-GCTS0425
-PBN/A1B2B3B4C1D4L1O1S1S2 SUR/282B DOF/181014 REG/ABCDE EET/LFFF0034
LECM0129 LPPC0200 GCCC0343 RVR/200)

ErrorsSYN71: FIELD TEXT TOO LONG AT ROW= 7, COL= 6 (PBN)
Does S1 S2 replace an already entered code?

Anyone help ?

[His dudeness]

Originally Posted by dc9-32

Not sure if anyone here can assist but the company aircraft has been approved for LNAV/VNAV approaches and I can see the PBN codes to use are S1 and S2.

However, Eurocontrol does not validate the codes as follows:

(FPL-ABCDE-IG
-B737/M-SFDGHIJ1J4J5RWXYE1E2E3M1/LB1V1D1
-EGSS0900
-N0462F370 NUGBO M183 SILVA Q41 SAM M195 LORKU UN866 KORUL DCT AGADO
DCT ORTIS
-GCTS0425
-PBN/A1B2B3B4C1D4L1O1S1S2 SUR/282B DOF/181014 REG/ABCDE EET/LFFF0034
LECM0129 LPPC0200 GCCC0343 RVR/200)

ErrorsSYN71: FIELD TEXT TOO LONG AT ROW= 7, COL= 6 (PBN)
Does S1 S2 replace an already entered code?

Anyone help ?

Have a look here:

klick

And here: next click

and here: another click

[dc9-32]

I can see only S2 is needed but the error persists. The SYN71 error.

[His dudeness]

Originally Posted by dc9-32

I can see only S2 is needed but the error persists. The SYN71 error.

You´re allowed only 8 entries. taking S1 off means you still have 9 entries left if I counted correctly...

[dc9-32]

Now have -PBN/A1B2B3B4C1D4L1S2 and I get a valid FPL after removing O1S1