How to see what RNP the airspace is?
Thread Starter
Joined: Oct 2001
Posts: 761
Likes: 22
From: England
How to see what RNP the airspace is?
Guys,
I would like to ask how to easilly find what RNP value any particular airspace is classified as. It used to be on the Eurocontrol website with B/P RNAV but I can not find out how to see what each block of airspace is classified as now.
Thank you
MM
I would like to ask how to easilly find what RNP value any particular airspace is classified as. It used to be on the Eurocontrol website with B/P RNAV but I can not find out how to see what each block of airspace is classified as now.
Thank you
MM
Joined: Jul 2007
Posts: 0
Likes: 0
From: Germany
Either that or check in the box. Most Navigational Databases show the RNP in the airspace you are flying. Ours reverts to 4 for north atlantic, 1 in the likes of Bahrain and 10 for remote.
Some useful gen on the Eurocontrol website too...
https://www.eurocontrol.int/publications
Only other place I can think of is Jeppy enroute manuals if you/company are a subscriber.
Last edited by VinRouge; 2nd September 2018 at 17:30.
