Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

A320 purpose of THS on MCDU


Notices
Tech Log The very best in practical technical discussion on the web

A320 purpose of THS on MCDU

Old 10th February 2015 | 03:19
  #21 (permalink)  
15 Anniversary
 
Joined: Jun 2007
Posts: 3,443
Likes: 39
From: Wanderlust
This will only be applicable to FWC H2F6. The aircraft having this FWC also have a 30 seconds count down from engine failure detection for relight.
vilas is offline  
Reply
Old 18th September 2016 | 12:20
  #22 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Apr 2006
Posts: 529
Likes: 0
From: Asia
The NTSB issued safety recommendation A-02-006

the item reads "acceptable alternate action" but i cant find that action.

http://www.ntsb.gov/_layouts/ntsb.re...x?Rec=A-02-006
MD83FO is offline  
Reply
Old 18th September 2016 | 16:49
  #23 (permalink)  
15 Anniversary
 
Joined: Jun 2007
Posts: 3,443
Likes: 39
From: Wanderlust
Airbus changed the method of setting from NU/DN to % MAC that must be the AAA.
vilas is offline  
Reply
Old 18th September 2016 | 18:08
  #24 (permalink)  
 
Joined: Mar 2007
Posts: 2,766
Likes: 4
From: Here and there
I remember an old fleet manager's notice summarising a foreign incident of miss-set trim. The advice was "anywhere in the green band and it will fly"
tubby linton is offline  
Reply
Old 18th September 2016 | 18:21
  #25 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Apr 2006
Posts: 529
Likes: 0
From: Asia
Hi vilas, SOP still states on FMGC cockpit preparation to insert flaps and THS on takeoff perf page,
the on after start it states "Pith trim hand whell set takeoff CG", rendering the THS units previously set useless. I feel we shouldnt be given those units nor should they be set
MD83FO is offline  
Reply
Old 18th September 2016 | 18:59
  #26 (permalink)  
15 Anniversary
 
Joined: Jun 2007
Posts: 3,443
Likes: 39
From: Wanderlust
MD
Yes. At the moment the MCDU software requires NU/DN input. But after start you set % on the wheel which you can convert from NU/DN to %.Also in A320 it is only as a reminder doesn't give warning. Therefore some airlines after start just take it from Fuel Pred page and set it.
vilas is offline  
Reply
Old 18th September 2016 | 19:10
  #27 (permalink)  
25 Anniversary
 
Joined: Jul 1999
Posts: 444
Likes: 5
From: England
If you mis set the ZfwCoG on the init page, but then set the correctly calculated trim setting, you will get the warning.
Capt Scribble is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.