PA handset metal inserts (Airbus)
Thread Starter
Join Date: Jun 2002
Location: Vega Constellation
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
PA handset metal inserts (Airbus)
OK, this is not directly related to flying , but is still an equipment we use every day.
The PA handset for airbus (320) is mainly made of plastic, but on either side of the handset, where the two plastic shells meet, are thin metal inserts, maybe copper alloy or brass. This is valid for cockpit and cabin handsets.
After sifting thru the FCOM, AMM, WDM, etc., I can't seem to find any information about its use. My guess is to cancel out any static electricity as soon as the handset is held, making contact with the hand, and reducing the risk of a spark.
Any thoughts anyone?
It seems other aircraft (some Boeing? ) do not have these metal inserts.
The PA handset for airbus (320) is mainly made of plastic, but on either side of the handset, where the two plastic shells meet, are thin metal inserts, maybe copper alloy or brass. This is valid for cockpit and cabin handsets.
After sifting thru the FCOM, AMM, WDM, etc., I can't seem to find any information about its use. My guess is to cancel out any static electricity as soon as the handset is held, making contact with the hand, and reducing the risk of a spark.
Any thoughts anyone?
It seems other aircraft (some Boeing? ) do not have these metal inserts.
Join Date: Aug 2002
Location: Earth
Posts: 3,663
Likes: 0
Received 0 Likes
on
0 Posts
My guess is to cancel out any static electricity as soon as the handset is held
My guess would be there are some magnets in those positions on the handset holder and the magnetism is used to help keep the handset where it belongs during periods of turbulence etc.
Thread Starter
Join Date: Jun 2002
Location: Vega Constellation
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Well... dragging your feet on the carpet in the cabin can built thousands of volts (although low amps). The microphone area is protected by a metal grid. If given the choice, would you prefer a jolt on you lips or on your hand?
Not sure it's the design function anyway, looking for more info.
Not sure it's the design function anyway, looking for more info.
Last edited by FLEXPWR; 23rd Jul 2014 at 07:54. Reason: typos
Join Date: Aug 2002
Location: Earth
Posts: 3,663
Likes: 0
Received 0 Likes
on
0 Posts
The microphone area is protected by a metal grid. If given the choice, would you prefer a jolt on you lips or on your hand?
Admittedly I don't drag my feet on the carpet either