V2527-A5 Thrust
Thread Starter
Join Date: Jun 2009
Location: beirut!
Age: 29
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
V2527-A5 Thrust
Good evening pprune,
Can someone tell me how much thrust you get out of this engine? According to one site it's 24,800 and another 26,600.
So, which one is it?
Can someone tell me how much thrust you get out of this engine? According to one site it's 24,800 and another 26,600.
So, which one is it?
Hello,
According to the Type Certificate Data Sheet (paragraph 6)
https://www.easa.europa.eu/certification/type-certificates/docs/engines/EASA-TCDS-E.069_International_Aero_Engines_AG_(IAE)_V2500--A5_and_V2500--D5_series_engines-02-25012013.pdf
it has a Take Off Thrust rating of 11031 daN = 24800 lbf.
According to the Type Certificate Data Sheet (paragraph 6)
https://www.easa.europa.eu/certification/type-certificates/docs/engines/EASA-TCDS-E.069_International_Aero_Engines_AG_(IAE)_V2500--A5_and_V2500--D5_series_engines-02-25012013.pdf
it has a Take Off Thrust rating of 11031 daN = 24800 lbf.
Join Date: Oct 1998
Location: CGK to HKG
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
According to one site it's 24,800 and another 26,600.
24,800 for take off and an extra 'bump rating' up to 26,600 when required dependant upon the date entry plug fitted.
Thread Starter
Join Date: Jun 2009
Location: beirut!
Age: 29
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I would have to re-check my notes but it's possible both figures are correct.
24,800 for take off and an extra 'bump rating' up to 26,600 when required dependant upon the date entry plug fitted.
TW
24,800 for take off and an extra 'bump rating' up to 26,600 when required dependant upon the date entry plug fitted.
TW
I might be wrong though...
Join Date: Apr 2013
Location: cloud 9
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Hello ,
This is not strictly a v2500 engine question but i thought this would be an appropriate thread to post in .
Ok my question is the Flex is used for derating right . For eg i am not taking a huge load , i dont want the engines reving to their max limits so i " fool " the engine control in to thinking the outside air temperature is more so the thrust is reduced . Now what if i dial in a lower temperature ? like if the OAT is 35degrees and i put in 15 degrees .
1) will the engine control deliver a thrust that is available at 15 deg oat ? ( seems unlikely The physics of a gas turbine wont allow it.)
2) Or will may be try and fail and in the process may be cause damage to the engine ?
3) Figure out i am being stupid and give a warning may be ?
I understand each aircraft may have their own implementations but i am curious what the Airbus does and the IAE engine types.
Thanks.
This is not strictly a v2500 engine question but i thought this would be an appropriate thread to post in .
Ok my question is the Flex is used for derating right . For eg i am not taking a huge load , i dont want the engines reving to their max limits so i " fool " the engine control in to thinking the outside air temperature is more so the thrust is reduced . Now what if i dial in a lower temperature ? like if the OAT is 35degrees and i put in 15 degrees .
1) will the engine control deliver a thrust that is available at 15 deg oat ? ( seems unlikely The physics of a gas turbine wont allow it.)
2) Or will may be try and fail and in the process may be cause damage to the engine ?
3) Figure out i am being stupid and give a warning may be ?
I understand each aircraft may have their own implementations but i am curious what the Airbus does and the IAE engine types.
Thanks.
Thread Starter
Join Date: Jun 2009
Location: beirut!
Age: 29
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
1) will the engine control deliver a thrust that is available at 15 deg oat ? ( seems unlikely The physics of a gas turbine wont allow it.)
2) Or will may be try and fail and in the process may be cause damage to the engine ?
3) Figure out i am being stupid and give a warning may be ?
Join Date: Jul 2010
Location: Mumbai
Age: 34
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Ok my question is the Flex is used for derating right
1) will the engine control deliver a thrust that is available at 15 deg oat ? ( seems unlikely The physics of a gas turbine wont allow it.)
2) Or will may be try and fail and in the process may be cause damage to the engine ?
3) Figure out i am being stupid and give a warning may be ?
2) Or will may be try and fail and in the process may be cause damage to the engine ?
3) Figure out i am being stupid and give a warning may be ?
Flex temp cannot be lower than OAT and Tref (corner point). FADEC has ADIRS input. FLEX mode is armed only when temp inserted in MCDU is above OAT. So if you enter Flex temp lower than OAT and set thrust levers to FLX/MCT it will trigger a caution 'ENG THR LEVERS NOT SET and ask you to set TO/GA (If crew does not take any action then FADEC will automatically select TOGA thrust after 8 sec).
New aircrafts with CFM (not sure about IAE) trigger ENG SAT ABOVE FLEX TEMP if inserted value is lower than SAT/OAT before applying take off thrust.
Last edited by gAMbl3; 14th Apr 2014 at 12:55.
Join Date: Apr 2008
Location: nowhere
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Have never operated the V2500 but I did ride in the MD90 a few time recently. On the last flight I was near the very back with a view of the engine inlet. I was curious if it would have the same as the JT-8D on the 727 where as the engine is spooled up for takeoff, perhaps due to low pressure, there is a rope-like moisture condensation coming from behind and outside of the engine into the inlet. It did not happen.
But it was a night flight and as reverse was applied on landing, I saw what looked like a bunch of sparks or speckles of light in the intake which lasted until reverse thrust ended. Interesting.
But it was a night flight and as reverse was applied on landing, I saw what looked like a bunch of sparks or speckles of light in the intake which lasted until reverse thrust ended. Interesting.
Thread Starter
Join Date: Jun 2009
Location: beirut!
Age: 29
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
V2527 = V2500 series rated at 27,000lbs of thrust.
Thread Starter
Join Date: Jun 2009
Location: beirut!
Age: 29
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
you will notice that the 26,600 is an equivalent thrust at MN 0.2 - I wonder if this is the difference?
AND
What kind of measurement are EASA using?
Enlighten me