A320 FCOM Electrical Supply interpretation
Thread Starter
Join Date: Feb 2004
Location: -
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
A320 FCOM Electrical Supply interpretation
Hi guys,
On my FCOM, in each section of systems, there is an Electrical Supply section. In this section it lists what powers what. Example: FCOM DCS-29-40 Hydraulics ENG 1 driven Pump control = DC1, in the Norm/DC/ Column. So DC bus 1 powers that and if we lose DC bus 1, we lose that pump control.
So far, so good.
However, in another example DSC-32-10-60 Gears and Doors. It says for LGCIU 1 GRND/FLT on the Norm/DC/ Column.
Maybe it's a stupid question but... what does GRND/FLT mean exactly? And where exactly does the power come from?
I hope my question is clear.
Screwballs
On my FCOM, in each section of systems, there is an Electrical Supply section. In this section it lists what powers what. Example: FCOM DCS-29-40 Hydraulics ENG 1 driven Pump control = DC1, in the Norm/DC/ Column. So DC bus 1 powers that and if we lose DC bus 1, we lose that pump control.
So far, so good.
However, in another example DSC-32-10-60 Gears and Doors. It says for LGCIU 1 GRND/FLT on the Norm/DC/ Column.
Maybe it's a stupid question but... what does GRND/FLT mean exactly? And where exactly does the power come from?
I hope my question is clear.
Screwballs