Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Landing Gear Retraction

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

Landing Gear Retraction

Thread Tools
 
Search this Thread
 
Old 5th Jun 2013, 20:30
  #1 (permalink)  
Thread Starter
 
Join Date: Aug 2009
Location: all over
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Landing Gear Retraction

My understanding is that in most/all modern jets, when the gear lever is selected up, braking is automatically applied to stop gear rotation.

How is this achieved in the forward landing gear where there is no brake system?
flapsupdown is offline  
Old 5th Jun 2013, 20:39
  #2 (permalink)  
 
Join Date: Aug 2009
Location: Denver
Age: 49
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
There are two pads. When the nose gear is retracted, the wheels are touching the pads and they slow down.
Tomescu is offline  
Old 6th Jun 2013, 02:24
  #3 (permalink)  
 
Join Date: Jun 2010
Location: Brisbane, Australia
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts
These two 'pads', called snubbers, are sorta like rubber blocks that are attached to the roof of the nose wheel well.
When the NLG spinning wheels come into contact with these snubbers, at about the same time as the uplock is engaged, the wheels are quickly brought to a stop.
That is, except for the B727, a wonderful airplane, where there are NLG brakes fitted (in most cases), and therefore no snubbers are required.

EW73
EW73 is offline  
Old 6th Jun 2013, 03:39
  #4 (permalink)  
 
Join Date: Nov 2007
Location: Texas
Posts: 1,919
Likes: 0
Received 1 Like on 1 Post
You'll find a few 727s with NLG brakes these days. (Probably more correct to say you'll only find a few 727s these days.) But even in it's heyday, most 727s didn't have NLG brakes. Since you had to be more than 50% into the brakes before the NLG brakes kicked in they didn't see that much use. Plus they added dead weight that the airlines looked at as an extra passenger. So most airlines didn't order them or removed them and put the snubber strips in. You could tell when the snubbers were worn down because you'd hear the wheel spinning down under your seat after retraction.

In 13 years flying 13 dash numbers I never flew one with NLG brakes installed. Now I run across one every once in a while in a VIP configuration with the nose brakes because they have W&B issues and tend to carry them as ballast.
MarkerInbound is offline  
Old 6th Jun 2013, 03:47
  #5 (permalink)  
 
Join Date: Oct 2003
Location: Tickawarra
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
DC-4 had snubbers, you could smell the burnt rubber after gear retraction.
Yobbo is offline  
Old 6th Jun 2013, 07:00
  #6 (permalink)  
Thread Starter
 
Join Date: Aug 2009
Location: all over
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the answers!
flapsupdown is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.