Fokker F27 Exterior Inlets
Thread Starter
Join Date: May 2013
Location: Canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Fokker F27 Exterior Inlets
In the picture below. I would love to know whether this is only for the purpose of an APU Inlet or Does it serve for other functions like Heat Exchanger Ram Air Inlets?
http://upload.wikimedia.org/wikipedi..._APU_Inlet.jpg
I would also love to know where the Primary Heat Exchanger Inlets are on this plane?
http://upload.wikimedia.org/wikipedi...okker_F_27.jpg
This is a picture of the Rolls Royce Dart Engines and was wondering about the need for those movable doors/openings? The Exhaust is pretty Visible. Not Sure though which are for cooling etc..
I would appreciate detailed answers or clear resources to the topic.
Thank you for your time.
http://upload.wikimedia.org/wikipedi..._APU_Inlet.jpg
I would also love to know where the Primary Heat Exchanger Inlets are on this plane?
http://upload.wikimedia.org/wikipedi...okker_F_27.jpg
This is a picture of the Rolls Royce Dart Engines and was wondering about the need for those movable doors/openings? The Exhaust is pretty Visible. Not Sure though which are for cooling etc..
I would appreciate detailed answers or clear resources to the topic.
Thank you for your time.
Been a number of years but the inlets at the rear are for the acm heat exchangers. the doors on the lower front are for external fire extinguishers. I would have to look up my old books for the rest. the guard on the inlet is a required part for paradrop kit
