A320 tyre pressure indication
Thread Starter
Joined: Jun 2003
Posts: 471
Likes: 1
From: Australia
A320 tyre pressure indication
I've just done 2 sectors as pax on an A320. The 1st was an hour late in arriving and judging by the reception team on 4 engineers ,a jack and a spare nose tyre, coupled with a number of canvass spots on the arriving gear would indicate a prior knowledge.
On my old steam B747s the only indication of a tyre problem was vibration.Does the A320 have tyre pressure indications in the flightdeck?
I certainly would have appreciated that over the years on the classic B747.
Wunwing
On my old steam B747s the only indication of a tyre problem was vibration.Does the A320 have tyre pressure indications in the flightdeck?
I certainly would have appreciated that over the years on the classic B747.
Wunwing
Last edited by Wunwing; 10th November 2012 at 02:09.
Joined: Mar 2004
Posts: 435
Likes: 30
From: UK
The A320 has tyre pressure indications on the wheel system display page on the lower ECAM screen but only for the main wheels. Problems with the nose wheel tyre pressures would become apparent by vibration as you say or perhaps "pulling" to the left or right during taxying.
Joined: May 2004
Posts: 133
Likes: 0
From: UK
Sounds like the nose wheel worn beyond limits and the crew still took the aircraft home. Still, saved a few pennies for the airline. A few times I've had captains inform me on arrival that one of the tyres is worn beyond limits. Really? You can see that from the flight deck?
One wheel change and one ASR for me to fill out!
One wheel change and one ASR for me to fill out!
Joined: Apr 2002
Posts: 274
Likes: 3
From: england
Wunwing, eagle vision to spy "a number of canvass spots" from the pax cabin! I hope the Engineers brought out a nose wheel assy, they would have needed a big set of tyre levers to change a tyre! Tyre wear is normally inspected daily, along with the normal "Walkround" by the operating flight crew. 
Joined: Aug 2010
Posts: 79
Likes: 0
From: between FL0-350
http://flightlevel350.tumblr.com/image/35128862084
Tyre Pressure Indication System (TPIS) is the computer that generates the error signals to Flight Warning Computers (FWC) for ECAM displays. Once the aircraft is powered up and the Wheel page is brought, all errors will be on spotlight.
during landing A320, automatically brings the Wheel page and there anything wrong will be also shown and chims go ring!, but I haven't come across any in flight pressure reduction of a wheel, but yet possible?
Code0
Last edited by code0; 6th November 2012 at 14:37. Reason: image not displaying
Joined: Aug 2010
Posts: 79
Likes: 0
From: between FL0-350
Fly3 . . A320 wheel pressure is displayed on ECAM for every wheel! . . all 6 wheels including the front 2. The front wheel tyre pressure is very important as it is the nose wheel that holds the centre line with the rudder until u slow down 
Joined: Mar 2006
Posts: 1,974
Likes: 0
From: Choroni, sometimes
Tyre pressure is a serious issue....
Be sure yours are inflated properly.
ASN Aircraft accident McDonnell Douglas DC-8-61 C-GMXQ Jeddah-King Abdulaziz International Airport (JED)
Be sure yours are inflated properly.
ASN Aircraft accident McDonnell Douglas DC-8-61 C-GMXQ Jeddah-King Abdulaziz International Airport (JED)
Joined: Aug 2010
Posts: 79
Likes: 0
From: between FL0-350
WhySoTough the tire pressure is a function of your weight and tire dimensions!
For A320
AMM says:
71.9 / 73.9 / 75.9 ton MRW with following tire dimensions
46 X 17 R20 -> 193psi
46 X 16 20 -> 193psi
49 X 17 20 -> 160psi
49 X 19 20 -> 144psi
77.4 ton MRW with following tire dimensions
46 X 16 20 -> 200psi
46 X 17 R20-> 200psi
49 X 17 20 -> 167psi
49 X 19 20 -> 149psi
And about the TPIS on A320s yes its an option! I lately found out! Sorry I thought its standard!
Code0
For A320
AMM says:
71.9 / 73.9 / 75.9 ton MRW with following tire dimensions
46 X 17 R20 -> 193psi
46 X 16 20 -> 193psi
49 X 17 20 -> 160psi
49 X 19 20 -> 144psi
77.4 ton MRW with following tire dimensions
46 X 16 20 -> 200psi
46 X 17 R20-> 200psi
49 X 17 20 -> 167psi
49 X 19 20 -> 149psi
And about the TPIS on A320s yes its an option! I lately found out! Sorry I thought its standard!
Code0
Last edited by code0; 7th November 2012 at 05:08.
Thread Starter
Joined: Jun 2003
Posts: 471
Likes: 1
From: Australia
yotty.
Actually I saw the aircraft arrive from a terminal window looking down onto the nose of the aircraft.
Clearly as the engineers arrived with a jack and spare wheel 45 minutes prior to arrival, they knew about the problem quite early.
It was not my intention to criticise the crew, this is not the right board for that. It just spiked my interest to see if things had improved since my retirement.
Blown tyres interest me after I had one throw a tread on a B747SP during take off and take out a large section of the rear end and hydraulic lines.
Monitoring tyre pressures would probably have prevented that one.
Wunwing
Actually I saw the aircraft arrive from a terminal window looking down onto the nose of the aircraft.
Clearly as the engineers arrived with a jack and spare wheel 45 minutes prior to arrival, they knew about the problem quite early.
It was not my intention to criticise the crew, this is not the right board for that. It just spiked my interest to see if things had improved since my retirement.
Blown tyres interest me after I had one throw a tread on a B747SP during take off and take out a large section of the rear end and hydraulic lines.
Monitoring tyre pressures would probably have prevented that one.
Wunwing
Last edited by Wunwing; 11th November 2012 at 05:17.
