B777-300 Hydraulics
Thread Starter
Joined: Jan 2007
Posts: 82
Likes: 0
From: Djakarta
B777-300 Hydraulics
Good Morning
1.Would anybody know what the capacities of the 3 Hydraulic reservoirs in litres are.
2.What would be the capacity of the centre hydraulic system if a leak developed and the only remaining fluid that was left was at the stand pipe level.
Thanks
1.Would anybody know what the capacities of the 3 Hydraulic reservoirs in litres are.
2.What would be the capacity of the centre hydraulic system if a leak developed and the only remaining fluid that was left was at the stand pipe level.
Thanks
Usual disclaimers apply!
Joined: Nov 1999
Posts: 843
Likes: 0
From: EGGW
I'm sure that the -200 and -300 are the same. So...
L and R systems the reservoirs contain 28 Ltrs and there is 7.6 Ltrs remaining below stack pipe level.
Centre Sys. the reservoir contains 41.7 Ltrs and there is 4.5 Ltrs remaining below stack pipe level.
And JFI. For the L and R systems the stack pipe supplies the EDP, the ACMP being fed from the bottom of the tank.
For the Centre sys ACMP 2, both ADP's and the RAT are fed from the stack pipe. ACMP 1 being fed from the bottom of the tank.
L and R systems the reservoirs contain 28 Ltrs and there is 7.6 Ltrs remaining below stack pipe level.
Centre Sys. the reservoir contains 41.7 Ltrs and there is 4.5 Ltrs remaining below stack pipe level.
And JFI. For the L and R systems the stack pipe supplies the EDP, the ACMP being fed from the bottom of the tank.
For the Centre sys ACMP 2, both ADP's and the RAT are fed from the stack pipe. ACMP 1 being fed from the bottom of the tank.
