Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Huge distance between V1 and VR

Wikiposts
Search

Notices
Tech Log The very best in practical technical discussion on the web

Huge distance between V1 and VR

Thread Tools
 
Search this Thread
 
Old 4th March 2012 | 15:23
  #1 (permalink)  
Thread Starter
 
Joined: Feb 2010
Posts: 8
Likes: 0
From: BR
Huge distance between V1 and VR

Hello everyone!

I`ve been flying a >50 ton commercial jet for a few months now and there is something that is bothering me for a long time.

Sometimes, on a long runway takeoff (>3000 meters) with normal parameters (normal weight, not too heavy not too light, normal temperature, etc.) the V1 and VR are too far from eachother, for eg. V1 115kt and VR 135kt

in all cases, i`ve discussed this with the CA, and they all have the same doubt; could this v1 speed just be wrong?

Cheers!!
ersh2k4 is offline  
Reply
Old 4th March 2012 | 15:42
  #2 (permalink)  
Per Ardua ad Astraeus
 
Joined: Mar 2000
Posts: 18,575
Likes: 4
From: UK
Don't think so - it would appear your company uses performance biased towards 'Vgo' rather than the 'traditional' which would probably have V1 and Vr coincident on a 'long' runway.. .
BOAC is offline  
Reply
Old 4th March 2012 | 15:52
  #3 (permalink)  
 
Joined: Feb 2012
Posts: 4
Likes: 0
From: New York
Not sure about your plane but on the Gulfstream V I fly with Honeywell boxes, you could run into this issue if you do all the takeoff perf calculations before the takeoff fuel load is manually or automatically entered.
frankthefrowner is offline  
Reply
Old 4th March 2012 | 16:12
  #4 (permalink)  
50 Countries Visited
20 Anniversary
 
Joined: Sep 2001
Posts: 410
Likes: 87
From: EASA territory
There's a lot of interesting info for you in this thread and particularly in this post.
sabenaboy is offline  
Reply
Old 5th March 2012 | 02:27
  #5 (permalink)  
 
Joined: Jun 2002
Posts: 286
Likes: 0
From: Vega Constellation
On the plane I fly (320) depending on which performance equipment you use (EFRAS software for example), for the conditions you describe, there is a wide range of V1 speeds you can use. This will help determine as well how much distance remaining to the end of the runway. Your company may chose to select the lowest V1 as default?
FLEXPWR is offline  
Reply
Old 5th March 2012 | 04:03
  #6 (permalink)  
100 Countries Visited
25 Anniversary
 
Joined: Sep 1999
Posts: 5,552
Likes: 25
From: ME
if you do all the takeoff perf calculations before the takeoff fuel load is manually or automatically entered.
Why would you do the performance calculations with an incorrect fuel figure?
mutt is offline  
Reply
Old 5th March 2012 | 11:59
  #7 (permalink)  
 
Joined: Jun 2002
Posts: 286
Likes: 0
From: Vega Constellation
mutt, I think he meant to input some estimates before getting the actual data, just to see what possibilities are at hand.
On the bus, you can insert estimates values for weight, CG, fuel, to get an idea of the flap/maneuvering speeds, cruise altitude you'll be able to chose, etc.
FLEXPWR is offline  
Reply
Old 5th March 2012 | 13:09
  #8 (permalink)  
Per Ardua ad Astraeus
 
Joined: Mar 2000
Posts: 18,575
Likes: 4
From: UK
It's ok, guys - I suspect SSG has been breeding again.
BOAC is offline  
Reply
Old 5th March 2012 | 16:57
  #9 (permalink)  
Thread Starter
 
Joined: Feb 2010
Posts: 8
Likes: 0
From: BR
oh that explains a lot...

i`ve always considered v1 as been fixed, based on the variables you have, using ALL runway distance available to a full stop.

so what i still dont understand is, why would we limit V1 in order to be able to stop with some distance remaining? I mean, in a real emergency event, i would feel very uncofortable to continue the takeoff knowing i could stop the aircraft after V1...

i dont get it!
ersh2k4 is offline  
Reply
Old 5th March 2012 | 17:37
  #10 (permalink)  
 
Joined: Oct 2009
Posts: 1,270
Likes: 0
From: UK
Hi
I mean, in a real emergency event, i would feel very uncofortable to continue the takeoff knowing i could stop the aircraft after V1...
i dont get it!
That's easy to fix. Just do take offs from limiting runways.
rudderrudderrat is offline  
Reply
Old 5th March 2012 | 19:13
  #11 (permalink)  
Fleet Manager
25 Anniversary
 
Joined: Apr 2001
Aviation Qualifications: ATPL
Posts: 7,441
Likes: 306
From: various places .....
why would we limit V1 in order to be able to stop with some distance remaining?

perhaps we might prefer that to stopping with some grass behind us ?

Putting aside facile comments, the problem comes down to one of risk and risk management for managing an engine failure.

By far the greatest risk during takeoff is a critical accel-stop manoeuvre. The margins (especially pre-amendment 42) are such that one should prefer other alternatives.

The continued takeoff, on the other hand, offers far lower risk, especially as the aircraft progresses away from the runway and the gross-nett delta provides an increasing terrain clearance pad.

Caveats -

(a) for very lightweight takeoffs operating to min speed schedules, the proximity to the real world Vmcg may make a continued takeoff very difficult

(b) in the real world, the range of failures and problems which might warrant rejection aren't necessarily embodied in the AFM certification data.
john_tullamarine is offline  
Reply
Old 5th March 2012 | 21:23
  #12 (permalink)  
 
Joined: Feb 2012
Posts: 14
Likes: 0
From: Earth
You have to understand that airline pilots are taught that all planes fly after V1, like there is some electromagnetic cushion provided by the airspeed indicator that defies all logic and physical reality.

That way, when the pilots rotate after V1, they are completely impervious to the fuel truck stuck in their landing gear, the birds that went into the engines, the 02 canisters exploding in the nose, the terrorist that took out the flight controls, the jack screw that wasn't properly inspected, the ice they didn't clean off, the 152 that slammed into the cockpit, the cargo door that just opened, the copilots who's seat that just went full rear(but he's still flying -lol), the FOD that takes out your left engine, the deflating or blown tires...on and on...

You see, that way, you can use less power on the roll, less power = longer overhaul times, the company saves money. They are happy, you have a job, your happy.

See how this works?

So the next time you when you push the throttles up only part way, and burn up all the runway to VR, don't think about this stuff. I will only make your head hurt, and you won't be considered a team player.
Anotheravatar is offline  
Reply
Old 6th March 2012 | 00:09
  #13 (permalink)  
Fleet Manager
25 Anniversary
 
Joined: Apr 2001
Aviation Qualifications: ATPL
Posts: 7,441
Likes: 306
From: various places .....
airline pilots are taught that all planes fly after V1

While there might be a certain familiarity to the style of the last post, I think that the above comment is a tad in the throw away line department.

I think it more probable that reputable airlines emphasise the benefits of SOP whilst giving enough information for line pilots to exercise a modicum of discretion.

I recall a line check on the B727 years ago as a young sprog wherein at the debrief the very wise greybeard checkie observed "John, always keep in mind the invisible ink writing on page two of the Ops Manual - To Be Read With a Bit of Commonsense "
john_tullamarine is offline  
Reply
Old 6th March 2012 | 00:28
  #14 (permalink)  
 
Joined: Feb 2012
Posts: 14
Likes: 0
From: Earth
So your saying you would do a post V1 abort if the conditions warranted?
Anotheravatar is offline  
Reply
Old 6th March 2012 | 01:35
  #15 (permalink)  
Fleet Manager
25 Anniversary
 
Joined: Apr 2001
Aviation Qualifications: ATPL
Posts: 7,441
Likes: 306
From: various places .....
So your saying you would do a post V1 abort if the conditions warranted?

Perhaps you might cite a postulated scenario rather than waxing lyrical in generic manner ? The protocol is to adopt SOP procedures unless they, clearly, are not going to work.
john_tullamarine is offline  
Reply
Old 6th March 2012 | 02:57
  #16 (permalink)  
 
Joined: Feb 2012
Posts: 14
Likes: 0
From: Earth
Find me an airline pilot willing to bust a SOP because it 'clearly won't work' and we can talk scenarios. Airlines hire guys that follow orders, not think out of the box.
Anotheravatar is offline  
Reply
Old 6th March 2012 | 03:18
  #17 (permalink)  
Community Builder
20 Anniversary
 
Joined: Dec 2002
Aviation Qualifications: ATP+Mil
Posts: 3,982
Likes: 566
From: Where the Quaboag River flows, USA
Not again, I'm getting too old for this "mulligan" of the V1 reject thread.

OR,

Is it Goundhog Day on Pprune

GF

PS: if you really think pilots are hired to take orders, you might research the 1989 strike at TAA and Ansett.
galaxy flyer is offline  
Reply
Old 6th March 2012 | 03:21
  #18 (permalink)  
Fleet Manager
25 Anniversary
 
Joined: Apr 2001
Aviation Qualifications: ATPL
Posts: 7,441
Likes: 306
From: various places .....
Airlines hire guys that follow orders, not think out of the box

Perhaps I come from a superseded variant of airline ? .. as it happens, one of the aforementioned airlines.

Not again,

Probably getting to that time of the thread, I guess.
john_tullamarine is offline  
Reply
Old 6th March 2012 | 03:22
  #19 (permalink)  
 
Joined: Apr 2010
Posts: 0
Likes: 0
From: Home soon
Popcorn and coke (drink that is) out and ready
de facto is offline  
Reply
Old 6th March 2012 | 04:20
  #20 (permalink)  
 
Joined: Aug 2003
Posts: 3,833
Likes: 2
From: Sale, Australia
Popcorn and coke (drink that is)
You don't need the other kind de facto. Reading post by Anotheravatar (err....SSG) you would swear you already were on the other stuff.

Interesting, on another thread he says,
I don't plan on spending my whole life in a cockpit.
I wasn't aware he had spent any of his life in a cockpit.
Brian Abraham is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.