Wikiposts
Search

Notices
Tech Log The very best in practical technical discussion on the web

ETP

Thread Tools
 
Search this Thread
 
Old 3rd May 2013 | 06:51
  #41 (permalink)  
 
Joined: May 2013
Posts: 11
Likes: 0
From: Earth
ETOPS

Apart from the ADS is there any other reason why the EEP ETP EXP should NOT be part of the FMS flight plan.?
Thanks
Longjon is offline  
Reply
Old 5th May 2013 | 16:36
  #42 (permalink)  
 
Joined: Mar 2008
Posts: 555
Likes: 0
From: Western USA
Just for clarification on how an ETP2/3 (in my case) is defined...

1. Use the wind at the altitude capability and half the distance from the ETP to the desired ETP airport to determine the ETP plot position, i.e. GSR and GSC. Having the appropriate MB charts onboard are a good reference, otherwise how would you know the winds along the ETP2/3 course at the required performance FL? It's a ballpark figure, but still as accurate as you can get. Accuracy still counts, right?

2. Use two or three engine TAS and FL as appropriate.

3. ETP, because of all the obvious variables, is just an estimated position, but it can be a valuable tool should it be necessary to know.

4. Never having really used it is not an excuse or for not plotting an ETP overwater.

Just my old-school, two cents after manually plotting and training them for years. Adjust your two-motor, ETOPS flying machines accordingly.

Last edited by Desert185; 5th May 2013 at 16:37.
Desert185 is offline  
Reply
Old 16th May 2013 | 07:20
  #43 (permalink)  
 
Joined: May 2013
Posts: 11
Likes: 0
From: Earth
ETP

You enter the coordinates and stow it as a stored WPT then you can either recall it on by pressing WPT on on the EFIS panel or else enter it on the FMS flight plan
.....this is not recommended.but bible s you ETA and fuel predictions.
Longjon is offline  
Reply
Old 16th May 2013 | 07:50
  #44 (permalink)  
 
Joined: Aug 2007
Posts: 289
Likes: 2
From: The Netherlands
Again ...

See this exact same discussion in the topic that ran less than 2 weeks ago ...

http://www.pprune.org/tech-log/51398...ight-plan.html

It's on page 3 of this tech log now.

Happy reading
EMIT is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.